G05 - Kafas4: 025D0B -control unit not coded for the vehicle - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: G05 - Kafas4: 025D0B -control unit not coded for the vehicle (/showthread.php?tid=73486) Pages:
1
2
|
G05 - Kafas4: 025D0B -control unit not coded for the vehicle - Semi14 - 06-01-2023 Hello I found the same topic, but I can't add replies to it anymore : https://cartechnology.co.uk/showthread.php?tid=71673&highlight=Kafas4 I have the same problem with KAFAS4 After FDL coding I have an error - " 025D0B - Kafas control unit not coded for the vehicle" Kafas coded to VO and Flash - error remains KAFAS is original The topic says to find a way to disable two existing CAFDs. Must exist as CAFD_ffffffff-255_255_255 And then inject a new CAFD Can someone tell me how to make CAFD FFFFFFF look like in KAFAS ???? Unless there is another way to get rid of this error I would be grateful for a hint Regards RE: G05 - Kafas4: 025D0B -control unit not coded for the vehicle - Siki78 - 06-01-2023 Write it with SVT-editor RE: G05 - Kafas4: 025D0B -control unit not coded for the vehicle - Semi14 - 06-01-2023 (06-01-2023, 10:27 AM)Siki78 Wrote: Write it with SVT-editor It does not work I found a way - NCD Preparation \ NCD Preparation from SVT Click on KAFAS and press Calculation and Sign NCD files are created, which we manually inject as new into KAFAS CAFD_FFFFFFFF_255_255_255 appear after injection Unfortunately, after pressing Detect CAF from SWE and after the new coding, the error still remains - 025D0B - Kafas control unit not coded for the vehicle RE: G05 - Kafas4: 025D0B -control unit not coded for the vehicle - Siki78 - 06-01-2023 Run tal calculation and see which cafd need to be there. Go to coding tab read svt_ist save it and edit. Write your cafd from tal calculation and vo code kafas RE: G05 - Kafas4: 025D0B -control unit not coded for the vehicle - Semi14 - 06-01-2023 (06-01-2023, 12:34 PM)Siki78 Wrote: Run tal calculation and see which cafd need to be there. Go to coding tab read svt_ist save it and edit. Write your cafd from tal calculation and vo code kafas I was calculating TAL before I was doing Flash KAFAS because I thought it would help with this problem. Unfortunately, it didn't help. CAFD are good RE: G05 - Kafas4: 025D0B -control unit not coded for the vehicle - Yah - 06-01-2023 You should also flash KAFAS to the latest software. And then do the corruption of CAFD files of KAFAS. RE: G05 - Kafas4: 025D0B -control unit not coded for the vehicle - Semi14 - 06-01-2023 (06-01-2023, 14:20 PM)Yah Wrote: You should also flash KAFAS to the latest software. And then do the corruption of CAFD files of KAFAS.Flashed KAFAS4 with original FA to Istep 22-07 VO Code original FA I also did coding Verification and uploaded the created CAFD Unfortunately, it didn't work and the error persisted RE: G05 - Kafas4: 025D0B -control unit not coded for the vehicle - krug - 06-01-2023 US to ECE conversion? RE: G05 - Kafas4: 025D0B -control unit not coded for the vehicle - Semi14 - 07-01-2023 (06-01-2023, 21:06 PM)krug Wrote: US to ECE conversion? Yes - conversion US to EU. KAFAS was not encoded with changed VO. In total, the only module with changed VO that was coded was BDC, the rest of the modules were coded after FDL RE: G05 - Kafas4: 025D0B -control unit not coded for the vehicle - CEBEP - 07-01-2023 Just code kafas with default car FA |