+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Virginise MJD 602 (/showthread.php?tid=74385)
Virginise MJD 602 - ch0ngin - 28-01-2023
after further deliberation i reset ECU with pin then used original pin to program immobiliser function in CIM,,
only to find i have DTC P0090 rail pressure control valve voltage low..
my engine don't have the extra sensor on rail..
so i need different hardware ECU or Rail with control valve / wiring to ecu?
not sure if the rail control valve can be removed via OBD/BDM Firmware presumably..
i tried to remove DTC P0090.. Via Map car still didn't fire..