Ista/p update problem motorbike g450x - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Ista/p update problem motorbike g450x (/showthread.php?tid=7447) |
Ista/p update problem motorbike g450x - 530d - 27-05-2015 I have a problem with BMW motorbike g450x 2008/06. Update ista / p ended in failure, now I have a problem with communication. ecu kms-k16 How connect this ecu "On Desk" and programming dcan or icom and winkfp? RE: Ista/p update problem motorbike g450x - epsodus - 28-05-2015 Hi, your Diagnose port on your g450x a 10 pin conector. Pin 10 = KI15 Pin 4 = Ground Pin 1 = K-Line Pin 6 = KL 30 ( 12 Volt ) You have not Dcan, you have K-Line. Have you a Icom with IcomD cable ? This works RE: Ista/p update problem motorbike g450x - 530d - 28-05-2015 I have icom, dcan, kcan, ads RE: Ista/p update problem motorbike g450x - 530d - 03-06-2015 I use Icom D cable! the update proceeded failure, now I have a problem with communication with motorbike. ECU KMS-k16 is dead, motorcycle does not work. RE: Ista/p update problem motorbike g450x - KaiO - 03-06-2015 Maybe the ICOM D is wired wrong. There are a lot of them on the market |