ford fiesta abs module programming - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: Ford - Mazda (https://cartechnology.co.uk/forumdisplay.php?fid=69) +---- Thread: ford fiesta abs module programming (/showthread.php?tid=74985) |
ford fiesta abs module programming - AROUNDLOCKS - 09-02-2023 hi to all i have 2012 fiesta 1.2 i believe it has abs module fault. i would like to know if i can take data from old module to new module with ids without having to do a pats relearn for keys . i don't generally use ids. any help appreciated aroundlocks RE: ford fiesta abs module programming - mecadriano - 09-02-2023 If you open the part you can change eprom, immo data is there.but I've seen them exchange with ids of line, but I don't know the procedure, I believe it's in the module and programming, replace abs, it must read the data from the old one and launch it in the new one, follow the procedure. RE: ford fiesta abs module programming - AROUNDLOCKS - 09-02-2023 hi [b]mecadriano[/b] yes i thought about i thought about that way but ive never looked inside one and wouldn't know if data in eeprom or mcu/also how many eeproms in module and which to remove. if i can do with ids offline without pats relearn its not a problem. neither is removing eeprom if it can be done that way. i just need to know either way. thank you for replying all help is welcome arounlocks RE: ford fiesta abs module programming - fraserauto - 10-02-2023 (09-02-2023, 23:21 PM)AROUNDLOCKS Wrote: hi [b]mecadriano[/b] If use 2nd hand ABS will need to code to immo with IDS RE: ford fiesta abs module programming - AROUNDLOCKS - 10-02-2023 (10-02-2023, 09:16 AM)fraserauto Wrote: If use 2nd hand ABS will need to code to immo with IDShi is it possible to open abs module and is immo data in the eeprom . if it is can i program abs on car so asbuilt data the same and then swap eeprom for the immobilizer. aroundlocks RE: ford fiesta abs module programming - fraserauto - 10-02-2023 (10-02-2023, 10:30 AM)AROUNDLOCKS Wrote:I don't know how to do that only use factory tools(10-02-2023, 09:16 AM)fraserauto Wrote: If use 2nd hand ABS will need to code to immo with IDShi is it possible to open abs module and is immo data in the eeprom . RE: ford fiesta abs module programming - AROUNDLOCKS - 11-02-2023 (10-02-2023, 20:31 PM)fraserauto Wrote:if module is faulty and needs changing and a new one programming i think it will need 2 keys to relearn pats so i have to make a new key as only 1 key for the car(10-02-2023, 10:30 AM)AROUNDLOCKS Wrote:I don't know how to do that only use factory tools(10-02-2023, 09:16 AM)fraserauto Wrote: If use 2nd hand ABS will need to code to immo with IDShi is it possible to open abs module and is immo data in the eeprom . and will also need incode for the immo and then program new module to car. i shall remove and have a look inside of module and see if it has internal fault as it needs changing anyway after saving asbuilt data as a backup/ i shall keep you updated on my findings and outcome and thank you for your knowledge aroundlocks |