+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Mini R56 Xenon and headlight washer retrofit (/showthread.php?tid=75188)
Mini R56 Xenon and headlight washer retrofit - qbek90 - 14-02-2023
Hi i retrofited R56 for xenon and headlight washer,i add 522 and 502 and coded frm and speg.Headlight washer dont work,i must change speg?when i activate washer from SPEG, dont work.
RE: Mini R56 Xenon and headlight washer retrofit - lustek - 15-02-2023
(14-02-2023, 22:24 PM)qbek90 Wrote: Hi i retrofited R56 for xenon and headlight washer,i add 522 and 502 and coded frm and speg.Headlight washer dont work,i must change speg?when i activate washer from SPEG, dont work.
Did you code jbe?
RE: Mini R56 Xenon and headlight washer retrofit - qbek90 - 15-02-2023
Jbbf in Mini is name SPEG.Yes i coded.
RE: Mini R56 Xenon and headlight washer retrofit - lustek - 15-02-2023
(15-02-2023, 07:39 AM)qbek90 Wrote: Jbbf in Mini is name SPEG.Yes i coded.
OK. Did you test voltage on hedalight washer pump?
RE: Mini R56 Xenon and headlight washer retrofit - qbek90 - 15-02-2023
Yes headlight washer won't start,no 'ground' from JPEG to relay
RE: Mini R56 Xenon and headlight washer retrofit - inspi1981 - 15-02-2023
Ground is constant. Speg supply power.
Did You add relay and fuse?
According to wiring diagram?
RE: Mini R56 Xenon and headlight washer retrofit - qbek90 - 15-02-2023
Supply is ok ,i added relay and fuse 2,relay is controlled by ground.Suply is constant
RE: Mini R56 Xenon and headlight washer retrofit - inspi1981 - 16-02-2023
post VIN .
RE: Mini R56 Xenon and headlight washer retrofit - qbek90 - 16-02-2023
Vin for Mini is WL53782
RE: Mini R56 Xenon and headlight washer retrofit - inspi1981 - 17-02-2023
According wiring diagram ground is constant and relay supply 12V