W211 SBC need help - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: Mercedes Benz - Smart (https://cartechnology.co.uk/forumdisplay.php?fid=63) +---- Thread: W211 SBC need help (/showthread.php?tid=75373) |
W211 SBC need help - ILDIRA - 19-02-2023 Hi guys I have problem with sbc I have error C26FB and C25D4 I reset the sbc with avdi but still this errors Need to replace the brushes ? Any idea ? RE: W211 SBC need help - al70 - 19-02-2023 did you take it for a drive after you reset, sometimes you need to drive for a while or at least leave the car running for around 10 min.s before errors go away RE: W211 SBC need help - ILDIRA - 19-02-2023 Yes I driving after reset Is still same RE: W211 SBC need help - gcs190 - 19-02-2023 Your captures do not show relevant information regarding the problem, you will get little help with that information and no, it is not necessary to drive in an SBC under any circumstances if the problem is resolved properly. RE: W211 SBC need help - KeeleyKaayz - 24-02-2023 check power and grounds and connection, if all ok probably bad SBC Unit RE: W211 SBC need help - DerLehrer - 27-02-2023 You can send it to repair, but the best would be to change the brushes and the reservoir. RE: W211 SBC need help - gcs190 - 16-03-2023 (27-02-2023, 22:37 PM)DerLehrer Wrote: You can send it to repair, but the best would be to change the brushes and the reservoir. It is much more effective and professional to diagnose the problem than to change parts just to change them and wait to see what happens, that is the technique used by everyone who is not a professional. |