+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Question about BMW key making (/showthread.php?tid=7707)
RE: Question about BMW key making - 840i - 21-03-2016
Who is selling a good Ak 90 please?
I know many online shops are selling it, but some are probably bad quality.
Hoping to buy a good quality one
Cheers
RE: Question about BMW key making - Sensible_ - 04-04-2016
+1 for BMW Multi Tool. Used many times via OBD programming or from eep dump. Good quality tool. Blank keys always available via Chinese markets.
RE: Question about BMW key making - bawareca - 04-04-2016
I have been using EWS editor for 2 years for EWS 3 and 4 key making and ISN change. It is faultless. If there is a perfect tool this must be it. Not even mentioning the price.
RE: Question about BMW key making - muskatas - 22-04-2016
(04-04-2016, 19:27 PM)bawareca Wrote: I have been using EWS editor for 2 years for EWS 3 and 4 key making and ISN change. It is faultless. If there is a perfect tool this must be it. Not even mentioning the price.
What are you using to read ISN from dde/dme?
RE: Question about BMW key making - bara001 - 04-05-2016
(22-04-2016, 07:05 AM)muskatas Wrote:(04-04-2016, 19:27 PM)bawareca Wrote: I have been using EWS editor for 2 years for EWS 3 and 4 key making and ISN change. It is faultless. If there is a perfect tool this must be it. Not even mentioning the price.
What are you using to read ISN from dde/dme?
Hi. EWS editor is the best. i use my fvdi to read the isn from dde/dme, i write the code in ews ( password) write back to ews and after sync ews to dde/dme using fvdi and voila job done. car start with different ews or dde/dme.
RE: Question about BMW key making - fisekovic - 04-05-2016
How do you read ews with MCU mas 2d47j USING EWS Editor? On kline? It is dangerous to read via k-line as it can delete that mcu?
RE: Question about BMW key making - bawareca - 05-05-2016
(04-05-2016, 16:57 PM)fisekovic Wrote: How do you read ews with MCU mas 2d47j USING EWS Editor? On kline? It is dangerous to read via k-line as it can delete that mcu?
I personally avoid these type of EWS, but if it is erased it can be virginized and re-adapted to the car.
RE: Question about BMW key making - fisekovic - 05-05-2016
(05-05-2016, 10:08 AM)bawareca Wrote:(04-05-2016, 16:57 PM)fisekovic Wrote: How do you read ews with MCU mas 2d47j USING EWS Editor? On kline? It is dangerous to read via k-line as it can delete that mcu?
I personally avoid these type of EWS, but if it is erased it can be virginized and re-adapted to the car.
How can you say then that EWS editor is "best" and "faulteless" when it even cant read one type of mcu?
RE: Question about BMW key making - SweetBMW - 18-07-2016
Hi.
Wanted to chime in here with a question just to make sure I get correct answers.
I want to retrofit comfort access into my E60.
If i get blank keys from china, can i use just the AK300 for this job, since its new blank keys, or do i have to use any of the other programs mentioned here as well?
RE: Question about BMW key making - Stivikivi - 09-09-2017
(18-07-2016, 04:41 AM)SweetBMW Wrote: Hi.
Wanted to chime in here with a question just to make sure I get correct answers.
I want to retrofit comfort access into my E60.
If i get blank keys from china, can i use just the AK300 for this job, since its new blank keys, or do i have to use any of the other programs mentioned here as well?
did you succeed?