+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: 2005 audi tt (/showthread.php?tid=8114)
2005 audi tt - Dayo - 13-06-2015
I had problems doing an audi tt 2005 today. im using digi 4.94. selected tt and used obd cable, comes up question mark, insert new mileage and it does its stuff. then it asks to remove dash fuse, removed the fuse but nothing. iv had a few goes, also tried driving the car a few miles and doing a battery reset.
anyone had issues doing a TT?
thanks
RE: 2005 audi tt - teerak2uk - 13-06-2015
Don't xtool do it?
Sent from my GT-P5110 using Tapatalk
RE: 2005 audi tt - Dayo - 13-06-2015
Unfortunately not
cant understand why digi wouldnt do it...
RE: 2005 audi tt - proaudio - 14-06-2015
I believe digi will do the tt under a different model car from vw
I know if your working on a vw that is set to miles instead of km
you need to use a scantool like x431 or autel ds708 or better and
code ecu to Europe 12 hour clock km then use digi then code back to us or you will get errors in miles normally if its ecu coding error the miles will goto 0 have no fear use adaption on scan tool to go forward miles just cant reverse
RE: 2005 audi tt - pietje001 - 14-06-2015
I've read digiprog cant do some dashes of TT. then take a look at another tool to change it manually on circuitboard
2005 audi tt - Dayo - 14-06-2015
I think its possible by using the enigma manual that use c12 and convert it to digi st51 9s12
Sent from my iPhone using Tapatalk