How to correct VIN / Milage easily - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: How to correct VIN / Milage easily (/showthread.php?tid=8121) |
How to correct VIN / Milage easily - tontito - 14-06-2015 Hello dear friends! I have changed my tachometer on our mini cooper R56 to add alarm lightning. Now the Milage have changed. What is the most easy way to correct milage? I have K+DCAN usb interface with NCSexpert, Ediabas, Winkfp, ISTA/P. Thank you very much! RE: How to correct VIN / Milage easily - OKCZ - 14-06-2015 Desolder eeprom from cluster. Delete VIN and change mileage. Put back and code it and write vin with NCS. RE: How to correct VIN / Milage easily - tontito - 15-06-2015 (14-06-2015, 21:18 PM)OKCZ Wrote: Desolder eeprom from cluster. Delete VIN and change mileage. Put back and code it and write vin with NCS. Thank you! Oh shit, i have never soldered before. Is it not possible to do it using just software coding? Thank you friend! RE: How to correct VIN / Milage easily - OKCZ - 15-06-2015 VIN can't be changed with coding so you still have to remove eeprom. Sorry. RE: How to correct VIN / Milage easily - tontito - 15-06-2015 Hello! *But here they show how to change using WinKFP: https://www.youtube.com/watch?v=GtYjET5bMM8 *And here they say its possible with Chinese BMW SCANNER version with special K+DCAN units. http://www.ecutool.com/4-in-1-BMW-Diagnostic-Interface_7547.html http://www.ecutool.com/BMW-Dash-Scanner-3-in-1_4095.html http://www.ecutool.com/search.asp?keyword=R56&Submit2=+ *And using NCS expert, but i cant find a guide on how to do it. Maybe it should work using this for R56 mini cooper? Or the problem is you can't change the Vin on all modules using this softwares? I only want to change in the tachometer. (Kombi Module?). Thank you very much!! RE: How to correct VIN / Milage easily - OKCZ - 15-06-2015 No, only way is desolder it. After you modify eeprom, you will write new VIN with WinKFP or NCS and code it to default values. Mileage will synchronize automatically after that. RE: How to correct VIN / Milage easily - tontito - 15-06-2015 Hmm. Are you sure? Becouse many people say it is possible, only you say it is not possible. :O ? RE: How to correct VIN / Milage easily - Chriz - 15-06-2015 I only know the ways by desoldering, or with a good programmer and a clip you can do it in curcuit, but you have to disamble your cluster RE: How to correct VIN / Milage easily - Czozen - 22-06-2015 Tontito, as Chriz said. You have to disassemble cluster and use programmer to change VIN to (FF) and milage to (00), after that, turn NCS Expert On, and SG_CODIEREN -> Execute Job on Your KOMBI instrument. RE: How to correct VIN / Milage easily - SweetBMW - 01-09-2015 You can change vin in modules in bmws \ minis, except for a few. e.g kombi, cas, dme\dde |