2005 e90 330i msv70 stuck at program abort mode - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: 2005 e90 330i msv70 stuck at program abort mode (/showthread.php?tid=81563) |
2005 e90 330i msv70 stuck at program abort mode - mercuris - 25-07-2023 hi, everyone i tried upgrade my car's dme with winkfp without uif while after 100% signature check failed what i've tried -flash with bootsectorupdate with uif off same 100% signature check failed -flash with expert mode with uif same 100% signature check failed any suggestion guy? RE: 2005 e90 330i msv70 stuck at program abort mode - bmchicago - 25-07-2023 use ISTA/p with ICOM, do not use D-CAN cable, especially without ediabaslib update. RE: 2005 e90 330i msv70 stuck at program abort mode - mercuris - 25-07-2023 (25-07-2023, 14:44 PM)bmchicago Wrote: use ISTA/p with ICOM, do not use D-CAN cable, especially without ediabaslib update. hmm i don't have icom cable at the moment, only dcan and enet. any other option? RE: 2005 e90 330i msv70 stuck at program abort mode - jaramillo - 25-07-2023 Icom is the best option to recover that module.. check in kdcan that latency is set to 1 in device administrator RE: 2005 e90 330i msv70 stuck at program abort mode - mercuris - 25-07-2023 (25-07-2023, 17:36 PM)jaramillo Wrote: Icom is the best option to recover that module.. check in kdcan that latency is set to 1 in device administrator ya i confirm the latency is 1 before i start the flash, i don't have any problem flashing dme with other e series before, this is the first time i suspect i selected the wrong zb number the first time, i tried to flash with the original zb number, results the same RE: 2005 e90 330i msv70 stuck at program abort mode - jaramillo - 25-07-2023 try to use NFS emergency flash with correct zb number RE: 2005 e90 330i msv70 stuck at program abort mode - Node - 25-07-2023 There are some DMEs which just can't be flashed using DCAN cables. Especially with crappy chinesium firmware. RE: 2005 e90 330i msv70 stuck at program abort mode - mercuris - 25-07-2023 (25-07-2023, 17:50 PM)jaramillo Wrote: try to use NFS emergency flash with correct zb number ok, i'll definitely get into that (25-07-2023, 17:52 PM)Node Wrote: There are some DMEs which just can't be flashed using DCAN cables. Especially with crappy chinesium firmware. ya i'll definitely get a icom cable just to be secure RE: 2005 e90 330i msv70 stuck at program abort mode - mercuris - 26-07-2023 this is my nfs result any suggestion? RE: 2005 e90 330i msv70 stuck at program abort mode - Vadim AA - 26-07-2023 Use ICOM !!! ======== |