+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Solved ✔ Kia Sportage no start after eeprom mode (/showthread.php?tid=82885)
Kia Sportage no start after eeprom mode - Arczi26 - 03-09-2023
I have problem with Kia Sportage 1.7 ecu bosh edc17c08. After mode eeprom file car no start. When I try to start the car, an icon appears immo. Car no crank. When I am back to the oryginal file its to same problem. Checksum counted. Eeprom is modified after the start attempt. Wjhat is wrong? Ecu is dead? Ori file "eeprom kia". The diagnosis shows ecuram/rom damage.
RE: Kia Sportage no start after eeprom mode - volavka - 04-09-2023
i dont undestand whats are you trying to do BUT ori EEPROM has no issue
i guess there a bytes conflict between ram/rom
Try immo off in flash
RE: Kia Sportage no start after eeprom mode - raffy haddad - 04-09-2023
Why you moded eeprom what was the problem and as volavka ask what were you doing
Try volavka file
What tool your using to read and write maybe tool issue
Regards
RE: Kia Sportage no start after eeprom mode - Arczi26 - 04-09-2023
Today I tray write this file. I'm curious what mistake I made. I'm a little guilty because I didn't make a copy of the whole thing, only separately. Maybe something went wrong while reading. I've done this before and never had a problem. Thank you for your help.
I was changing eeprom because i was setting km/dpf
RE: Kia Sportage no start after eeprom mode - Arczi26 - 20-09-2023
Case solved, damaged flash, uploaded flash and eeprom from another car and done immo off