Solved ✔ polo me17.5.26 clone - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: Solved ✔ polo me17.5.26 clone (/showthread.php?tid=83608) |
||||||||||
polo me17.5.26 clone - al70 - 23-09-2023 hi all, this polo has injector issue that was traced back to the ecu, i have a matching numbers ecu from same car and i need to clone, i don't think it's as simple as just swapping data over, could someone help me to clone, eeprom and flash from both ecu's are in the folder, cheers all RE: polo me17.5.26 clone - CenturionM - 23-09-2023 (23-09-2023, 11:05 AM)al70 Wrote: hi all, this polo has injector issue that was traced back to the ecu, i have a matching numbers ecu from same car and i need to clone, i don't think it's as simple as just swapping data over, could someone help me to clone, eeprom and flash from both ecu's are in the folder, cheers all hi maybe use VCDS to code injectors: you have the coding below and in the picture an example injector IMA code. Ignition on Engine off [Choice] [01 - Engine] [Adaptation - 10] Channel 071: IMA-ISA Wart Cylinder 1 Channel 072: IMA-ISA Wart Cylinder 2 Channel 073: IMA-ISA Wart Cylinder 3 Channel 074: IMA-ISA Cylinder Ratio 4 Channel 075: IMA- ISA Wart Cylinder 5 Channel 076: IMA-ISA Wart Cylinder 6 [Test] [save] [Done, Go Back] And if you have the UDS protocol, enter the engine coding and select individual cylinders there and change their values. I sent you information in a private message Good luck! RE: polo me17.5.26 clone - al70 - 23-09-2023 The driver for injector 1 is faulty in original ECU RE: polo me17.5.26 clone - CenturionM - 23-09-2023 (23-09-2023, 20:17 PM)al70 Wrote: The driver for injector 1 is faulty in original ECU then maybe turn off the DTC or replace the controller it could be a mechanical problem injector damage, power supply short circuit, leak etc. It's hard to say what is the cause... but these are mechanical issues RE: polo me17.5.26 clone - al70 - 23-09-2023 0 voltage from ECU to injector RE: polo me17.5.26 clone - JV22 - 23-09-2023 Hi you can try, I do not know if it will work, the files you sent are modified. Got the original file?
|