+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Mercedes Benz - Smart (https://cartechnology.co.uk/forumdisplay.php?fid=63)
+---- Thread: xentry VCI C6 vxdiag (/showthread.php?tid=83820)
xentry VCI C6 vxdiag - Harrycz44 - 28-09-2023
Hi all
I have problem with vxdiag C6 , got error wifi adapter but vci is connected via USB, I reinstal driver but not help..
Any idea please?
RE: xentry VCI C6 vxdiag - gcs190 - 28-09-2023
You are never going to make it work over WiFi, but this error is typical when it is not properly installed, this requires multiple solutions and, obviously, No one can know what you have done wrong or have not done.
RE: xentry VCI C6 vxdiag - connector - 29-09-2023
In my opinion C4 is the superior interface, clone or OEM. Better to just use C4. I don't know how good it is actually on DOIP, but there is information about how to make it work on those vehicles.
I've used real C4/C5/C6, C4 seems faster, and C5/C6 absolutely have issues on older cars. I've seen situations where dealer says they need to replace a module because of no communication, but C4 communicates fine 100%, C6 problem.
P.S. Sorry, I know this wasn't your question. Forum often considers VXDiag/Allscanner as "Allscammer". I disagree a little about that opinion, and think some of the work they do is quite clever, but your better buying a clone from somewhere else, because VXDiag interfaces are often limited by software licensing etc, and while its a pretty easy thing to bypass, why buy from a company that puts that extra layer which requires you to give more money, for a product that is not even as good as other clone options that have no time limit.
RE: xentry VCI C6 vxdiag - singleperson - 19-11-2023
Hello,
How do you add VCI C6 as default?
Is there smart connect for VCI C6 the same as VCI C4?
I used to use Xentry 3.2020 with VCI C4 but my old laptop was broken
Hoping that someone could assist me
thanks in advance
RE: xentry VCI C6 vxdiag - maxs30 - 19-11-2023
(19-11-2023, 08:37 AM)singleperson Wrote: Hello,
How do you add VCI C6 as default?
Is there smart connect for VCI C6 the same as VCI C4?
I used to use Xentry 3.2020 with VCI C4 but my old laptop was broken
Hoping that someone could assist me
thanks in advance
Not like c4. True configassist.
RE: xentry VCI C6 vxdiag - singleperson - 19-11-2023
(19-11-2023, 09:09 AM)maxs30 Wrote:(19-11-2023, 08:37 AM)singleperson Wrote: Hello,
How do you add VCI C6 as default?
Is there smart connect for VCI C6 the same as VCI C4?
I used to use Xentry 3.2020 with VCI C4 but my old laptop was broken
Hoping that someone could assist me
thanks in advance
Not like c4. True configassist.
active star key normally and plug in VCI C6?
(19-11-2023, 09:09 AM)maxs30 Wrote:could you please advise how to add vci C6?(19-11-2023, 08:37 AM)singleperson Wrote: Hello,
How do you add VCI C6 as default?
Is there smart connect for VCI C6 the same as VCI C4?
I used to use Xentry 3.2020 with VCI C4 but my old laptop was broken
Hoping that someone could assist me
thanks in advance
Not like c4. True configassist.
RE: xentry VCI C6 vxdiag - ross2018 - 19-11-2023
If you want me to take a look send me on private message teamviwer id and pass.
RE: xentry VCI C6 vxdiag - BabeH - 20-11-2023
(28-09-2023, 19:52 PM)Harrycz44 Wrote: Hi all
I have problem with vxdiag C6 , got error wifi adapter but vci is connected via USB, I reinstal driver but not help..
Any idea please?
That is easy, connect C6 via USB, go to VXDIAG to turn on and setup C6 wifi,
on computer side, connect that wifi ssid that you have set.
Then the C6 will work with either wifi and usb connection.
RE: xentry VCI C6 vxdiag - maxs30 - 20-11-2023
(19-11-2023, 09:35 AM)singleperson Wrote:(19-11-2023, 09:09 AM)maxs30 Wrote:(19-11-2023, 08:37 AM)singleperson Wrote: Hello,
How do you add VCI C6 as default?
Is there smart connect for VCI C6 the same as VCI C4?
I used to use Xentry 3.2020 with VCI C4 but my old laptop was broken
Hoping that someone could assist me
thanks in advance
Not like c4. True configassist.
active star key normally and plug in VCI C6?
(19-11-2023, 09:09 AM)maxs30 Wrote:could you please advise how to add vci C6?(19-11-2023, 08:37 AM)singleperson Wrote: Hello,
How do you add VCI C6 as default?
Is there smart connect for VCI C6 the same as VCI C4?
I used to use Xentry 3.2020 with VCI C4 but my old laptop was broken
Hoping that someone could assist me
thanks in advance
Not like c4. True configassist.
the easiest way show you how
RE: xentry VCI C6 vxdiag - Siner18509 - 06-12-2023
(29-09-2023, 02:08 AM)connector Wrote: In my opinion C4 is the superior interface, clone or OEM. Better to just use C4. I don't know how good it is actually on DOIP, but there is information about how to make it work on those vehicles.
I've used real C4/C5/C6, C4 seems faster, and C5/C6 absolutely have issues on older cars. I've seen situations where dealer says they need to replace a module because of no communication, but C4 communicates fine 100%, C6 problem.
P.S. Sorry, I know this wasn't your question. Forum often considers VXDiag/Allscanner as "Allscammer". I disagree a little about that opinion, and think some of the work they do is quite clever, but your better buying a clone from somewhere else, because VXDiag interfaces are often limited by software licensing etc, and while its a pretty easy thing to bypass, why buy from a company that puts that extra layer which requires you to give more money, for a product that is not even as good as other clone options that have no time limit.
How about eCom device's Softing?