+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: F25 LCI xenon retrofit coding (/showthread.php?tid=83822)
F25 LCI xenon retrofit coding - unicoil - 28-09-2023
Has someone actually retrofited on a F25 pre facelift with bixenon headlamps, facelift bixenon headlamps? Have installed used lci headlamps with used TMS modules, changed the pinout on headlamp side, updated car software, changed time criterion to 0814 and programmed and coded FRM again. At the moument angel eyes and lwr are not working, initializing of TMS has no effect, lamps not working (xenon, bixenon and turn signal are working). Fault codes are 800FC2 and 800FC3, initialisation fault in headlight driver modules. For me it looks like TMS needs to be reset/virginized. Is it possible to reset used TMS and how? Is a newer FRM needed or not? When coded TMS_ID to off, then lwr was working when switching xenon lights.
RE: F25 LCI xenon retrofit coding - Mwahab - 28-09-2023
lin for angel eyes need to be fdl coded if u didnt change the frm