Icom B - Most connector check - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Icom B - Most connector check (/showthread.php?tid=8388) |
Icom B - Most connector check - Skid1164 - 24-06-2015 Hi I have a new Icom A2 B C clone set, is it possible to test the Icom B most connector before program the first ECU (function test). In the forums is much written about non-functioning Icom b clones -> destroyed ecus. Regards RE: Icom B - Most connector check - Patrick11021979 - 28-06-2015 Nope... I didn't have a problem with programming my car with a clone Icom... You can plugging it en see if the two green lights work, before programming... RE: Icom B - Most connector check - bawareca - 28-06-2015 Just connect the ICOM A and B. If the MOST ring is still functional and both lights are green that means the ICOM B is functioning normally (receiving and sending optical signals). RE: Icom B - Most connector check - Skid1164 - 08-07-2015 Thank You for the answers Regards |