RAM coding problem - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: RAM coding problem (/showthread.php?tid=84443) |
RAM coding problem - jpimpao01 - 16-10-2023 I have a F40, I replaced MGU with a used MGU, but is virginized. I replaced BDC too with a brand new BDC. I programmed it with ISTA and everything worked well. Now I have problem with a factory fitted RAM, it lost CAFD, it was programmed with ISTA and CPS is always yyyyyyy. I can code it with e-sys, I can read CAFD, but when I read SVT always have CAFD_255.... and when I start car it lose all settings... when I read with ISTA it says not coded... Any idea? RE: RAM coding problem - DEJMIEN - 16-10-2023 Have you used online ista for programming ? RE: RAM coding problem - jpimpao01 - 17-10-2023 (16-10-2023, 19:12 PM)DEJMIEN Wrote: Have you used online ista for programming ? I programed BDC and MGU on BMW dealer with ISTA online. FSC and all validations was ok... I think it was updated. I updated after that with esys too. RE: RAM coding problem - Powerlab - 17-10-2023 Wrong thread......... RE: RAM coding problem - jaroslav - 17-10-2023 The same problem, just replace ram RE: RAM coding problem - jpimpao01 - 05-11-2023 No Solution at all? |