xentry truck info - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: Mercedes Benz - Smart (https://cartechnology.co.uk/forumdisplay.php?fid=63) +---- Thread: xentry truck info (/showthread.php?tid=85668) |
xentry truck info - test01 - 18-11-2023 Hello how to read with openport 2.0 mb trucks? i get error no conection RE: xentry truck info - gcs190 - 18-11-2023 (18-11-2023, 10:35 AM)test01 Wrote: Hello how to read with openport 2.0 mb trucks? i get error no conection Does your openport support 24V? The original was not prepared You're supposed to be using XPT, right? RE: xentry truck info - test01 - 19-11-2023 XPT, i have also scanmatik pro this have 24v ... can you help me ? i ned read ateco RE: xentry truck info - baner - 20-11-2023 (19-11-2023, 07:21 AM)test01 Wrote: XPT, i have also scanmatik pro this have 24v ... can you help me ? i ned read ateco You probably mean atego, what diagnostic connector it has? If is not obd, but round mercedes 14 pin, then you must use special interface connector for SM2PRO. If it has OBD connector, please check can lines and try to disconnect some of ecus. REgards |