Need Op Com HQ Firmware 1.60 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: Opel - Vauxhall - Holden (https://cartechnology.co.uk/forumdisplay.php?fid=59) +---- Thread: Need Op Com HQ Firmware 1.60 (/showthread.php?tid=8596) |
Need Op Com HQ Firmware 1.60 - Hoelgi - 04-07-2015 Hello, I have a Op Com HQ Clone, downgraded to FW 1.39. Now I want to set it back to FW 1.60. Do anyone have this firmware and could send it to me? Regards, Hoelgi RE: Need Op Com HQ Firmware 1.60 - rs@chip - 04-07-2015 Maybe this help.. RE: Need Op Com HQ Firmware 1.60 - Hoelgi - 04-07-2015 Thank you for the file but I need the 1.60 FW... RE: Need Op Com HQ Firmware 1.60 - mattydr67 - 04-07-2015 Use the Vaux-Com 131223d to upgrade your firmware to fw1.60 automatically Good luck RE: Need Op Com HQ Firmware 1.60 - Hoelgi - 04-07-2015 I have the original 131223d installed and started but nothing happens. The Software recognizes the interface firmware as 1.39. How can I start the firmware update?? RE: Need Op Com HQ Firmware 1.60 - carpi - 04-07-2015 Connect to a car. RE: Need Op Com HQ Firmware 1.60 - Hoelgi - 04-07-2015 OK, I will try this tomorow. But the software wants to be activated!? RE: Need Op Com HQ Firmware 1.60 - mattydr67 - 05-07-2015 Mate origi al software will works with genuibe tool If you have this combination you have to wrte your id and email and you can performe an onlibe activation Well as I ubderstand you are using a clone. So you cannot activate it in this mode In this case you need a license for your tool or a modified software for your tool. Or you need a moded opcom named HQ cloe which can be used with its real modified software Good luck P.S.- if you do not find the fw1.60 maybe is better to tell us for what you need if you cannot use the software version that need this version of firmware |