CarTechnoloGY
Poor results after remap Ford 2.0TDCI - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: Poor results after remap Ford 2.0TDCI (/showthread.php?tid=87201)

Poor results after remap Ford 2.0TDCI - jenny123 - 02-01-2024

Hi All,

Please advise what is wrong with attached remap file. From my point of view all looks fine but after flash car gets not more than 5% better performance. This is my private car, it's in very good condition, no errors or any other problems.

Inside original file and remapped one.

Thanks for looking.


galaxy_2010.zip
File Type: .zip
Downloaded: 12 times
Size: 205.24 KB



RE: Poor results after remap Ford 2.0TDCI - rs@chip - 03-01-2024

(02-01-2024, 14:54 PM)jenny123 Wrote:  Hi All,

Please advise what is wrong with attached remap file. From my point of view all looks fine but after flash car gets not more than 5% better performance. This is my private car, it's in very good condition, no errors or any other problems.

Inside original file and remapped one.

Thanks for looking.

few more limiters + rail would help ... fuel also not enough in my apinion

RE: Poor results after remap Ford 2.0TDCI - jenny123 - 03-01-2024

Stock file 150HP and 300Nm
Remap file 163HP and 315Nm

Thanks for advise will rise rail a bit, and try to find missing limiters.

RE: Poor results after remap Ford 2.0TDCI - Stammba - 03-01-2024

(03-01-2024, 06:53 AM)jenny123 Wrote:  Stock file 150HP and 300Nm
Remap file 163HP and 315Nm

Thanks for advise will rise rail a bit, and try to find missing limiters.

you can try this as a start from somwhere nothing calculated just raised fast the things you should work on  with this file there will be definetly difference pass pm give thanks and rep if i helped wink

RE: Poor results after remap Ford 2.0TDCI - jenny123 - 04-01-2024

Thanks Stammba for your help, limiters located smile

Regards