+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: I need ODIS E FLASH Files for Audi ABS 0003 - 8R0907379AS & 0046 - COMFORT 8K090764JN (/showthread.php?tid=87706)
I need ODIS E FLASH Files for Audi ABS 0003 - 8R0907379AS & 0046 - COMFORT 8K090764JN - m.murray - 16-01-2024
long story short I flashed the wrong update files with Odis - E and I cannot find any files for my Canadian spec 2014 Audi Q5 S-line. I need 0046 - Comfort Control module (8K0907064JN) and 0003 - ABS Module (8R0907379AS.) I lost complete communication with ABS module, the only thing it will let me do is flash new firmware. all lights on dash, speedometer not working, etc. I did order a new ABS module with original firmware. if no one has flash file for 8R0907379AS is there a way to extract firmware from new abs unit so I can flash it to my original?
RE: 2014 Audi Q5 BCM2 died after flash. Help! - TomSab - 17-01-2024
Only new bcm2 is possible adapt key and Immo vin with odis online! How programer you buy?Try read MCU old Ori ECU with programmer.
You must bcm2 adapt to car immo first and change VIN. New BCM and odis online is lower cost when you Ori bcm2 is death!
Old bcm2 Address 46 no communication and address 05 is possible read?
RE: 2014 Audi Q5 BCM2 died after flash. Help! - spacewalker - 17-01-2024
normally even you kill module shile flashing / power off, should be still diagnose and able to fix with proper flash, or any flash to wake up, and extract immo data
RE: 2014 Audi Q5 BCM2 died after flash. Help! - m.murray - 30-01-2024
(17-01-2024, 05:00 AM)TomSab Wrote: Only new bcm2 is possible adapt key and Immo vin with odis online! How programer you buy?Try read MCU old Ori ECU with programmer.
You must bcm2 adapt to car immo first and change VIN. New BCM and odis online is lower cost when you Ori bcm2 is death!
Old bcm2 Address 46 no communication and address 05 is possible read?
thanks for the reply, it would not let me delete post so I updated it with current problems.
(17-01-2024, 05:45 AM)spacewalker Wrote: normally even you kill module shile flashing / power off, should be still diagnose and able to fix with proper flash, or any flash to wake up, and extract immo data
yes thanks, I was not able to get into the system before I tried with parking lights on but it didn't work, it finally allowed me to access system with the hazard lights activated. I was able to flash new firmware but now I have other issues it says dynamic steering error but I don't have dynamic steering. looking for original firmware for modules now.