+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: BMW G01 Rear Camera Retrofit (/showthread.php?tid=87894)
BMW G01 Rear Camera Retrofit - Lpapp - 21-01-2024
one questions, i got retrofit set for G01 with BDC and it have 7 wires.
ICAM2-R have 8 pinout and one is not used.
ICAM2 pinout :
PIN 8 is WakeUp and is connected to A258*8B 54
PIN 7 is ground and is connected to Z10
PIN 6
PIN 5
PIN 4 is KL30B and is connected to Fuse F204
PIN 3 is not used
PIN 2
PIN 1
whats about PIN 1,2 and 5,6?
in BMW wiring diagram i can see only A258*9B PIN 38 and PIN 37 for ethernet, so where i have to put another 2 wires?
RE: BMW G01 Rear Camera Retrofit - hamzettin - 21-01-2024
Hello, pin 2, 6 and 7 is Ground
RE: BMW G01 Rear Camera Retrofit - Lpapp - 21-01-2024
thank you! i was wondering because PIN2 have notice "BDC only for X3".