+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: F30 LCI strange PDC issue (/showthread.php?tid=88906)
F30 LCI strange PDC issue - kklobo - 15-02-2024
Hi I need advice in this case
F30 LCI front damaged PDC wiring cut and 2 PDC sensors missing I buy two aftermarket and repair damaged wiring. Error cleaning and have errors on original pdc one is heating and doing short one have puncture in front.
I buy another two aftermarket and again error but different
80322f ultrasonic sensor front outer left , sensor fault: final oscillation time of the diaphragm too short,
after swapping sensors error stays on same plug I triple check wiring 0.1 ohm on wires 14.4v supply and good ground check with bulb, 5.14v on each signal line. Is possible that REM is fried?
I had f32 on workshop and changed whole front pdc wiring with sensors from f30 to F32 and on F32 works fine no errors and PDC working fine so I assume that sensors and front wiring is ok. Today I dont have time to check F32 wiring with sensors in f30 but is necessary? I think about swapping REM for testing and checking signal wire from bumper plug to rem plug
RE: F30 LCI strange PDC issue - kklobo - 17-02-2024
I repalce REM module code and work well, case closed.