+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: BMW DIS V57_CIPV44 VM Image for K+DCAN (/showthread.php?tid=8944)
Pages:
1
2
BMW DIS V57_CIPV44 VM Image for K+DCAN - doktorabg - 19-07-2015
Here is my VMware image for DIS_V57_CIP_V44_EN and DIS_V57_CIP_V44_DE
with K+DCAN(or Vag Com KKL) interface.
Suport BMW , MINI and Rolls Royce.
First of all you need to have 100% working INPA , Ediabas up to 6.4.7 , Diaghead Emulator and VMWare Player or Workstation up V7.
PM me for password ONLY if you have over 40 quality posts and min Rep 10 (not like - I want , Please I need , please,please ,please help me....) and you are not Junior member on forum and an active member and introduced!
Everybody else please don't ask for password for rar file!
Active member + thanks + rep = PASS!
Pass only via PM!
RE: BMW DIS V57 - doktorabg - 29-10-2015
Post updated with new modified Image with coding/programing - DIS V57_CIP V44_GERMAN
RE: BMW DIS V57 - kestum - 30-10-2015
Thank, DIS run prefect, I change display settings to 1366x768
![[Image: de2c4334e4e735712944a4520461342f.jpg]](http://i75.fastpic.ru/big/2015/1030/2f/de2c4334e4e735712944a4520461342f.jpg)
RE: BMW DIS V57 - ixot - 30-10-2015
I tested today ... ENG.. and GER.. version good work...
Thank you very much...
RE: BMW DIS V57_CIPV44 VM Image for K+DCAN - petkowo - 05-01-2016
Guys, is it some possible to use it with yellow diag head?
RE: BMW DIS V57_CIPV44 VM Image for K+DCAN - test01 - 08-02-2022
hello its working? how to install and workig n with k+dcan cable??
RE: BMW DIS V57_CIPV44 VM Image for K+DCAN - Shinoby - 08-02-2022
(08-02-2022, 14:40 PM)test01 Wrote: hello its working? how to install and workig n with k+dcan cable??Yes, working.
Installation same like in INPA, only need WM.
RE: BMW DIS V57_CIPV44 VM Image for K+DCAN - test01 - 08-02-2022
and do you have pass or instalation manual?
RE: BMW DIS V57_CIPV44 VM Image for K+DCAN - Shinoby - 08-02-2022
(08-02-2022, 17:45 PM)test01 Wrote: and do you have pass or instalation manual?To me no need password. Because I have this software on my PC 6 years from russian forum.
RE: BMW DIS V57_CIPV44 VM Image for K+DCAN - test01 - 09-02-2022
how to find ? working version ? i write pm tha people share, add thx and rep and no answer...