+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: ISTA/P Error (/showthread.php?tid=8955)
ISTA/P Error - pshoey - 19-07-2015
Anyone seen this error in ISTA/P before? I have the latest version 3.56.1.002 which I recently updated. This was working for me last time I ran it with 3.55.4.000.
I have just retro fitted a FRM3 module, so before I uninstall and re-install I wanted to see if anyone has seen this error and have any thoughts?
Thanks
[attachment=16445]
RE: ISTA/P Error - 2013m5 - 20-07-2015
(19-07-2015, 21:20 PM)pshoey Wrote: Anyone seen this error in ISTA/P before? I have the latest version 3.56.1.002 which I recently updated. This was working for me last time I ran it with 3.55.4.000.
I have just retro fitted a FRM3 module, so before I uninstall and re-install I wanted to see if anyone has seen this error and have any thoughts?
Thanks
Re-download the the ISPI_ISTA-P_DAT files and re-install the ISTA/P.
RE: ISTA/P Error - pshoey - 10-08-2015
Wasn't ISTA/P, it was fine. The FRM3 I had installed and coded but not changed the i-level to match the manufacturing date. Once I fixed that, ISTA/P was happy again.
You can update the i-level from tool32 by loading the appropriate car file (E89X.PRG in my case) and then selecting job I_STUFE_SCHREIBEN to write the correct base, current and backup i-level strings (use I_STUFE_LESEN to read the current values).
Hope this helps someone.