+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: Peugeot Boxer 2.0HDI DCM6.2C - adblueoff problem (/showthread.php?tid=89597)
Peugeot Boxer 2.0HDI DCM6.2C - adblueoff problem - vopi - 02-03-2024
Hi,
I have one crazy Boxer with DCM6.2C ECU.
I made a lot of adblueoff on this ECU and every think was ok till now.
I have one with adblueoff but with MIL ON and in ECU there are no DTC and I can´t delete MIL.
I made reset before write and after write I disconected adblue tank - like on other cars with the same ECU.
I attached two adblue mods which I used but with the same problem - all looks fine but the MIL is ON without any DTC in the ECU.
Please help me, where can be problem?
Before adblueoff I have only one DTC P20E8
thanks for help.
RE: Peugeot Boxer 2.0HDI DCM6.2C - adblueoff problem - Jurebv - 02-03-2024
havent looked at your file BUT you should disconenct urea tank conenctors, clear dtcs in EOBD generic (NOT Peugeot) then disconnect battery 10 mins MINIMUM, it will desepear , if not first try , repeat few times
RE: Peugeot Boxer 2.0HDI DCM6.2C - adblueoff problem - vopi - 03-03-2024
Jurebv, thanks for help but I tried three times with some diferent mods for adblueoff but still the same problem - MIL is ON and ECU doesnt have any DTC. With original SW MIL is OFF with DTC P20E8. I made the same car with the same SW and all was OK but this car is crazy