need update & mod VIN from FRM ?

need update & mod VIN from FRM ? - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: need update & mod VIN from FRM ? (/showthread.php?tid=89688)

need update & mod VIN from FRM ? - ka_rai - 04-03-2024

hi friends

customer replace FRM3R from E90 with FRM from china E90 so VIN is not ok
i repair FRM after crash battery so now FRM have not good coding

i must update FRM and mod VIN from FRM

i install ncsexpert but i have this error running ncsexpert and not understand why
i install bmw standtool2.12 and update daten 60.1

check screen from error runing ncsexpert or inpa

thanks fro your help

RE: need update & mod VIN from FRM ? - jaramillo - 04-03-2024

Use tool32 with correct prg and write with 18 digits or do with programmer in eeprom

RE: need update & mod VIN from FRM ? - Fx82 - 04-03-2024

Just flash with winkfp and code with ncsexpert.
Don't forget to write vo to frm

RE: need update & mod VIN from FRM ? - ka_rai - 05-03-2024

(04-03-2024, 18:24 PM)jaramillo Wrote: Use tool32 with correct prg and write with 18 digits or do with programmer in eeprom

how i can know correct prog ?
with programmer no way have dlfash to eeprom because VIN not match with car

(04-03-2024, 23:55 PM)Fx82 Wrote: Just flash with winkfp and code with ncsexpert.
Don't forget to write vo to frm

how know good flash using winkfp ?

problem is ncsexpert always warning message ; seem not working fine

RE: need update & mod VIN from FRM ? - vld - 05-03-2024

(05-03-2024, 07:03 AM)ka_rai Wrote:
(04-03-2024, 18:24 PM)jaramillo Wrote: Use tool32 with correct prg and write with 18 digits or do with programmer in eeprom

how i can know correct prog ?
with programmer no way have dlfash to eeprom because VIN not match with car

(04-03-2024, 23:55 PM)Fx82 Wrote: Just flash with winkfp and code with ncsexpert.
Don't forget to write vo to frm

how know good flash using winkfp ?

problem is ncsexpert always warning message ; seem not working fine

You have wrong configuration of BMW standard tools, fix that to have good communication and then flash with WinKFP.

RE: need update & mod VIN from FRM ? - Fx82 - 05-03-2024

If you have icom and I can do it remote for you.
Mine system doesn't support d-can cable.

RE: need update & mod VIN from FRM ? - ka_rai - 05-03-2024

is ok i write FA from cas to frm, now all working fine but VIN not according with car( always old vin in frm)

but seem my spdaten to old because i not found frm3R PL2 according sw 9224601 in my list from winkft

RE: need update & mod VIN from FRM ? - armenh7 - 25-03-2024

The second picture you posted is okay. The simplest way to get the proper zusb is use ISTA-P to calculate it.
You need to update the VIN using tool32.