+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: E-Sys and direct ecu connection PASS_THRU (/showthread.php?tid=90236)
E-Sys and direct ecu connection PASS_THRU - lacost - 18-03-2024
I have a J2534 adapter and I can connect ISTA to the car. But I think that E-sys did not read the settings from ediabas.ini and I get an error when use D_CAN and PASS_THRU
no interface was prepared for communication channel process://com.bmw.prodias.drv.ifhdll.IfhDllDriver
How to establish a direct connection to ECU in E-Sys?
RE: E-Sys and direct ecu connection PASS_THRU - Unspec - 18-03-2024
Does it have to be a direct connection? I've always used non-direct for my Esys needs.
RE: E-Sys and direct ecu connection PASS_THRU - VroomVroom - 18-03-2024
(18-03-2024, 15:55 PM)lacost Wrote: I have a J2534 adapter and I can connect ISTA to the car. But I think that E-sys did not read the settings from ediabas.ini and I get an error when use D_CAN and PASS_THRU
no interface was prepared for communication channel process://com.bmw.prodias.drv.ifhdll.IfhDllDriver
How to establish a direct connection to ECU in E-Sys?
use old esys version