Solved ✔ ISTA Standalone WLAN programming - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Solved ✔ ISTA Standalone WLAN programming (/showthread.php?tid=90344) |
ISTA Standalone WLAN programming - botho - 21-03-2024 Anyone knows if it's possible to activate programming with ISTA Standalone (4.39.20 in my case) ? I can't find any registry key that could do the job. Here is what ISTA prompt to me when i start execution plan Regards RE: ISTA Standalone WLAN programming - Node - 21-03-2024 You REALLY wish to flash over WLAN??? Why not just connect via cable as ISTA suggests? Much more robust connection. RE: ISTA Standalone WLAN programming - rocdeng - 21-03-2024 If you really want to and ISTA couldn't, you could try e-sys. I did flash with WIFI ENET adapter in e-sys, but don't know whether ICOM could, but you could try. RE: ISTA Standalone WLAN programming - tonemoz - 21-03-2024 <add key="BMW.Rheingold.RheingoldSessionController.CircumventProgramingProhibition" value="true" /> RE: ISTA Standalone WLAN programming - botho - 21-03-2024 (21-03-2024, 08:13 AM)tonemoz Wrote: <add key="BMW.Rheingold.RheingoldSessionController.CircumventProgramingProhibition" value="true" /> Working, thanks. (21-03-2024, 07:17 AM)rocdeng Wrote: If you really want to and ISTA couldn't, you could try e-sys. Yes, i tested ICOM NEXT original WIFI connection with E-Sys without any problem. |