Hello, need help with reset km to 0 , Vito 639, ezs mask 2M73Y - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10) +--- Thread: Hello, need help with reset km to 0 , Vito 639, ezs mask 2M73Y (/showthread.php?tid=90774) |
Hello, need help with reset km to 0 , Vito 639, ezs mask 2M73Y - Haisam95 - 31-03-2024 Hello, need help with reset km to 0 , Vito 639, ezs mask 2M73Y. Org. 1.2 mio or 1mio or 3xx.xxx Thanks RE: Hello, need help with reset km to 0 , Vito 639, ezs mask 2M73Y - sivyx - 31-03-2024 Hmm didnt see km in this dump, you read correct mcu?? RE: Hello, need help with reset km to 0 , Vito 639, ezs mask 2M73Y - al70 - 31-03-2024 i also thought something is wrong, i thought it should be mask 0L01Y ? RE: Hello, need help with reset km to 0 , Vito 639, ezs mask 2M73Y - sivyx - 31-03-2024 I dont know about mask of second mcu, if he was post more info, will by more easy.. RE: Hello, need help with reset km to 0 , Vito 639, ezs mask 2M73Y - immokill - 31-03-2024 Wrong mcu . Mask should be 0xxx R1 And post what km you need no need to put 0km only if you need 0km . RE: Hello, need help with reset km to 0 , Vito 639, ezs mask 2M73Y - sivyx - 01-04-2024 Hmm usually it have same mask on bouth mcus. Edit: And for sure he have same masks too, i found his thread on other forum RE: Hello, need help with reset km to 0 , Vito 639, ezs mask 2M73Y - Haisam95 - 01-04-2024 Yes, it has two MCUs but I couldn't find any instructions for the R1. However, I now have the problem that the control unit no longer works in the car. Just read a dump VVDI MB Tool recognized it. and reinstalled because someone sent me the wrong file. |