UPA HC05 motorola immo chip connection - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: UPA HC05 motorola immo chip connection (/showthread.php?tid=9129) Pages:
1
2
|
UPA HC05 motorola immo chip connection - dil6222 - 30-07-2015 Hello there can anyone help? I have upa programmer v1.3 and wish to read Motorola immo chip hc05. need some instructions on how to do this i believe i solder to certain board then connect to upa and read or can i do it via wires ? any help is appreciated my apologies if in wrong section RE: UPA HC05 motorola immo chip connection - dorofteius - 30-07-2015 It works with wires. Search in upa pdf. You have everithing you need. I belive it is immo box from vw ? RE: UPA HC05 motorola immo chip connection - dil6222 - 30-07-2015 (30-07-2015, 15:58 PM)dorofteius Wrote: It works with wires. Search in upa pdf. You have everithing you need. hello I don,t have the pdf could you send me one and nope it is from a Vectra b RE: UPA HC05 motorola immo chip connection - darek_naprawa - 30-07-2015 I don,t have the pdf could you send me one and nope it is from a Vectra b [/quote] Upa pdf._-_ RE: UPA HC05 motorola immo chip connection - dil6222 - 30-07-2015 (30-07-2015, 16:31 PM)darek_naprawa Wrote: I don,t have the pdf could you send me oneUpa pdf._-_ [/quote] hello it is the same as the one I already have I don,t understand connection method if you could help it would be appriecieted. my immo chip is hc05b16 I am new to this whole programming thing I see which pins correlate to pins on chip but not how to connect them. RE: UPA HC05 motorola immo chip connection - darek_naprawa - 30-07-2015 Connecting to the output 9 pin in upa. Do you want to read pin? RE: UPA HC05 motorola immo chip connection - dil6222 - 30-07-2015 (30-07-2015, 18:39 PM)darek_naprawa Wrote: Connecting to the output 9 pin in upa. yes I wish to read pin thanks for helping by the way do I need to desolder chip with air gun? I need detailed instructions if you can I only got my upa today. which pins on chip to connect to which pins on upa and where they are located and on which adaptor I can upload pictures of chip boards etc if you need them. cheers RE: UPA HC05 motorola immo chip connection - dorofteius - 30-07-2015 Man if you cannot understand what everibody has explained to you, just leave-it like that. You wil do more damage than good. Hc05 it is not an easy task. RE: UPA HC05 motorola immo chip connection - dil6222 - 30-07-2015 (30-07-2015, 20:19 PM)dorofteius Wrote: Man if you cannot understand what everibody has explained to you, just leave-it like that.i have no problem with soldering desoldering with hotair I know what all the pins on the chip are pin 9 etc I just need to know where pin 9 is on upa prog and any others that need connecting I have hc05 diagram from upa manual so I no what pins need connecting to which numbers but not where they are on upa boards. if you can answer some questions it would be appriecieted. 1. do I have to remove chip from immo board and solder on upa adapter or can it stay in place and just attach wires ? I see 2 places I can wire 1-9 by hotwire direct to pins on 1 adapter or possibly solder to another adapter j1 I can upload photos so you can confirm RE: UPA HC05 motorola immo chip connection - darek_naprawa - 31-07-2015 Upa reads HC05 in the system, you do not have to unsolder. Solder cables and connect the 9-pin connector. Remember to disconnect the VDD from the plate. |