+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: BMW 320d edc17c02 errors afther remap (/showthread.php?tid=91992)
Pages:
1
2
BMW 320d edc17c02 errors afther remap - Sertyu - 29-04-2024
Hi,
bmw e91 320d 177cv
that eroors cames afther remap
4c29, 4c2f, 4c2e dde internal control unit
i think it's torque limiter causing that errors
i read in forums that ecu need a proper tuning for more than 420nm but no one explain what i need to change
i have egr,dpf and swirl flaps deleted, hybrid turbo and intercooler
replaced tritan timing chain
i edit it whit ecm titanium maybe is not good for it, i'm noob about that
Thanks in advance for help!
RE: BMW 320d edc17c02 errors afther remap - pistolo30 - 30-04-2024
you file made,please rep and thanks,pass in PM
you have TORQUE LIMITED ACTIVATED
try is file
RE: BMW 320d edc17c02 errors afther remap - Sertyu - 30-04-2024
(30-04-2024, 07:31 AM)pistolo30 Wrote: you file made,please rep and thanks,pass in PM
you have TORQUE LIMITED ACTIVATED
try is file
Still the same, If I go over 4000rpm torque limiter stopping me and same errors reappear
RE: BMW 320d edc17c02 errors afther remap - pistolo30 - 01-05-2024
try is file,greetings
RE: BMW 320d edc17c02 errors afther remap - Sertyu - 02-05-2024
(01-05-2024, 07:12 AM)pistolo30 Wrote: try is file,greetings
That one works. I'll test it better in the weekend but I think you solve my problem. Really thanks
RE: BMW 320d edc17c02 errors afther remap - Sertyu - 10-05-2024
Sorry for delay, error 4d7f come out again with a bunch of errors in all the car, in sunroof in junction box,footwhell module ,everywhere. I've checked everything again and again no issues on the vehicle with original map
RE: BMW 320d edc17c02 errors afther remap - Sertyu - 11-05-2024
(01-05-2024, 07:12 AM)pistolo30 Wrote: try is file,greetings
Can I ask to you What values/address did you modify?
I find a limiter at this address 04339A,I modify it in hex from FF to 00 in 8bit I don't know if ecu have more limiters.
RE: BMW 320d edc17c02 errors afther remap - Hazerssmurf - 12-05-2024
(29-04-2024, 19:43 PM)Sertyu Wrote: Hi,
bmw e91 320d 177cv
that eroors cames afther remap
4c29, 4c2f, 4c2e dde internal control unit
i think it's torque limiter causing that errors
i read in forums that ecu need a proper tuning for more than 420nm but no one explain what i need to change
i have egr,dpf and swirl flaps deleted, hybrid turbo and intercooler
replaced tritan timing chain
i edit it whit ecm titanium maybe is not good for it, i'm noob about that
Thanks in advance for help!
here pass pm
RE: BMW 320d edc17c02 errors afther remap - Sertyu - 13-05-2024
(12-05-2024, 00:23 AM)Hazerssmurf Wrote:(29-04-2024, 19:43 PM)Sertyu Wrote: Hi,
bmw e91 320d 177cv
that eroors cames afther remap
4c29, 4c2f, 4c2e dde internal control unit
i think it's torque limiter causing that errors
i read in forums that ecu need a proper tuning for more than 420nm but no one explain what i need to change
i have egr,dpf and swirl flaps deleted, hybrid turbo and intercooler
replaced tritan timing chain
i edit it whit ecm titanium maybe is not good for it, i'm noob about that
Thanks in advance for help!
here pass pm
It works thanks,but just because that map don't reach 440nm and the torque limiter don't stop me, I add power at the map and same errors appears
RE: BMW 320d edc17c02 errors afther remap - Hazerssmurf - 13-05-2024
you apparently can't reach the 440nm with your remap
1. 43510 8 x 12 Torque Unknown Limiter Show
2. 50D14 8 x 14 Driver's Wish Show
3. 50E24 8 x 14 Driver's Wish Show
4. 52122 16 x 16 BMW MAF Show
5. 525BE 16 x 16 BMW MAF Show
6. 52802 16 x 16 BMW MAF Show
7. 579D6 8 x 13 Torque Back Pressure Limiter Show
8. 57B10 8 x 16 Torque Temp Limiter Show
9. 57F70 21 x 1 Torque Limiter Show
10. 57FC6 21 x 1 Torque Limiter Show
11. 580F8 21 x 1 Torque Limiter