BMW ISTA-P: How to Remove other modules from the Measures plan? - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: BMW ISTA-P: How to Remove other modules from the Measures plan? (/showthread.php?tid=9250) |
BMW ISTA-P: How to Remove other modules from the Measures plan? - BMWF01 - 05-08-2015 Topic: Hello Members I want to ask the BMW experts on this subject: How do i separate other modules from the measures plan and go through only with the CAS & DME modules to be programmed and encoded.? How do i also remove modules that are in Red (Modules that does not respond) from the ,measures plan? RE: BMW ISTA-P: How to Remove other modules from the Measures plan? - beemered - 05-08-2015 Maybe this is usefull. Found it somewhere. RE: BMW ISTA-P: How to Remove other modules from the Measures plan? - Joe2 - 05-08-2015 Activate expert mode. Then you can unmark all modules and pick-up from tree this one which you are intrested about. RE: BMW ISTA-P: How to Remove other modules from the Measures plan? - masa52 - 14-08-2015 Hi just checked with new ista 3.56.2. and all plan with skipped units went fine tried several times before with different ista and always system not aloud me to program without replace the units (dead loop) |