Actia MD + Can clip - Printable Version

Actia MD + Can clip - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Renault - Dacia - Nissan - Infiniti (https://cartechnology.co.uk/forumdisplay.php?fid=57)
+---- Thread: Actia MD + Can clip (/showthread.php?tid=9318)

Actia MD + Can clip - rs@chip - 09-08-2015

Hello all,
Is it posible to run can clip softwere with actia multidiag interface as generic?thanks in advance...

RE: Actia MD + Can clip - admiral - 09-08-2015

Of course not........ drive

RE: Actia MD + Can clip - rs@chip - 09-08-2015

Ok then..nisan conzult work with actia and with clip..that s why I ask...

RE: Actia MD + Can clip - vagvag - 09-08-2015

(09-08-2015, 07:26 AM)alex.eobd2 Wrote: Ok then..nisan conzult work with actia and with clip..that s why I ask...

Actia Multidiag software works only with the two Actia Vci's the old yellow and with the new grey........ nod

Renault clip works only with the classic Clip sonde probe Vci and with the Alliance VI Vci (Nissan Consult III Vci)......... nod

Thats all m8.............. wink2

Regarts....... beer

RE: Actia MD + Can clip - rs@chip - 09-08-2015

it work with toyota techstream and hds..vagvag which is the last update for 076957 serial for actia md?

RE: Actia MD + Can clip - vagvag - 09-08-2015

(09-08-2015, 17:15 PM)alex.eobd2 Wrote: Some people say it work with toyota techstream and hds..vagvag which is the last update for 076957 serial for actia md?

Actia Vci's yes work with Toyota techstream and Honda hds from long time........ nod

For your famous banned

s/n you can use III-2012 as free......... happy

Also you can use I-2015 but of course not for free........ cash

Regarts........ beer

RE: Actia MD + Can clip - rs@chip - 10-08-2015

I use 1-2013 right now..is posible to upgrade to 3-2013 only by softwere or need to reflash the pic....thanks

RE: Actia MD + Can clip - vagvag - 10-08-2015

(10-08-2015, 00:41 AM)alex.eobd2 Wrote: I use 1-2013 right now..is posible to upgrade to 3-2013 only by softwere or need to reflash the pic....thanks

With your

s/n I-2013 will not work correct and with all the ecu's!!!!!!!

Thats why i told you III-2012 but you can make anything you wish........(p)
No you cant to use any other version with your banned

s/n and you cant to reflash the pic m8!!!!! shake

You need to CHANGE it!!!!!!!!! nod

Good luck!!!!!!! yes

Regarts........ beer

RE: Actia MD + Can clip - rs@chip - 10-08-2015

Ok thanks for info..where can I download 2012-3 do you have link?