+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Autohex II (/showthread.php?tid=9415)
RE: Autohex II Technical Support & Feedback - volavka - 26-02-2016
(26-02-2016, 13:59 PM)lynxbmw Wrote: I did several times, they don't respond.
i don't think they received your email .. because they reply faster
Here AH sales email : [email protected]
Good Luck
RE: Autohex II Technical Support & Feedback - MTKAutoHex - 01-03-2016
[Autohex BMW Update]
Autohex II BMW software version 1.0.29 is available for Autohex II users.
This version fixed many issues came from version 1.0.28 as well as a major update in F series flashing.
E series:
- Fixed problem in flashing some specific modules (Error 8315,8337,...).
- Fixed problem of coding some DME/DDE modules (Error 8117)
F series:
- F15,F25 series is fully supported
- F56 series is fully supported
- Flash data have been updated.
http://www.micro-tronik.com/updatenews.aspx
RE: Autohex II Technical Support & Feedback - 0176.abraham - 01-03-2016
Autohex say as 1 Year german at soon but this is blabla no give german language
RE: Autohex II Technical Support & Feedback - MTKAutoHex - 02-03-2016
(01-03-2016, 20:54 PM)0176.abraham Wrote: Autohex say as 1 Year german at soon but this is blabla no give german language
Who promised you since a year for German language? We start translation to other languages just few months ago.
Do you have Autohex II? or you are waiting us to make German language?
RE: Autohex II Technical Support & Feedback - 0176.abraham - 03-03-2016
Iam waiting for german language....
On telefon say to me come but i wait and dont come...
RE: Autohex II Technical Support & Feedback - Jartsa - 09-03-2016
No response from that email. asked for prices too.
RE: Autohex II Technical Support & Feedback - MTKAutoHex - 10-03-2016
We reply all emails we got
RE: Autohex II Technical Support & Feedback - thecash - 14-03-2016
Pleas i need to program dme on the table with autohex2 -msv80- i did same connection as the picture but always i get no connection
for cas it worked , i can connect but when i program i always get error .
autohex says there is new soft but when i program it says error at the end .
pleas can you shed some light on programming cas and dme on the table , more info.
thank you.
RE: Autohex II Technical Support & Feedback - MTKAutoHex - 15-03-2016
Hi thecash,
On bench has been used by 100s of Autohex II users, they are happy with it.
Please make sure the CAN BUS wires are as short as possible (CAS wires and DME wires)
And make sure you put the resistor of 120 ohm for the DME.
Just be sure of this: It should work as it worked with many others.
Good luck
RE: Autohex II Technical Support & Feedback - MTKAutoHex - 16-03-2016
Hi Autohex II Locksmith users, below is a demo showing how to make a key for BMW X5 2013 all keys lost.