Autohex II - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Autohex II (/showthread.php?tid=9415) |
RE: Autohex II Technical Support & Feedback - Czozen - 17-03-2016 (16-03-2016, 08:06 AM)MTKAutoHex Wrote: Hi Autohex II Locksmith users, below is a demo showing how to make a key for BMW X5 2013 all keys lost. How does it work for F-series? RE: Autohex II Technical Support & Feedback - bawareca - 17-03-2016 (16-03-2016, 08:06 AM)MTKAutoHex Wrote: Hi Autohex II Locksmith users, below is a demo showing how to make a key for BMW X5 2013 all keys lost. Please make a video how to make key in ignition slot or with a key file. RE: Autohex II Technical Support & Feedback - MTKAutoHex - 17-03-2016 Hi Czozen. For F series you will need the Dump of EEPROM, If CAS is EWS5 you will need to read ISN from DME I think some members here in cartechnology tested this function many times. Hi bawareca in Key ignition is possible in few cases only like: - CAS is not encrypted and - CAS is not updated. For key programming with data file please see this video: https://www.youtube.com/watch?v=58be3ZIDFRA Cheers RE: Autohex II Technical Support & Feedback - thecash - 18-03-2016 Today i was able to connect cas and dme and do programming and cas adjustment on the table with autohex. i use autohex from when i open the doors of my shop and untill i close .it is one of the fastest device and very help ful. today i had frm with short circut and need to reset it with tools32 , i tried advanced coding and did a rest and the fault was gone very fast and did the job. ++ autohex getting better all the time . RE: Autohex II Technical Support & Feedback - MTKAutoHex - 18-03-2016 Below is a video shows how to change with used DME in F series. All in all took less than 6 minutes. RE: Autohex II Technical Support & Feedback - carlosgaros - 26-03-2016 (18-03-2016, 19:05 PM)MTKAutoHex Wrote: Below is a video shows how to change with used DME in F series. What dme and dde supported F-series ? Benzin and diesel ? RE: Autohex II Technical Support & Feedback - KEEEN - 29-04-2016 When AutoHex have to do downgrade ISTA P version, does it downgrade flash or eeprom? RE: Autohex II Technical Support & Feedback - MTKAutoHex - 29-04-2016 It works only in flash side, EEPROM will not be touched. Autohex II Technical Support & Feedback - _estima_ - 03-05-2016 New version , works In EGS ISN BMW F series ? The description of version dont Explain , If it from E-series or F-series !!! Sent from my iPhone using Tapatalk RE: Autohex II Technical Support & Feedback - osd - 04-05-2016 (03-05-2016, 15:27 PM)_estima_ Wrote: New version , works In EGS ISN BMW F series ? The description of version dont I'm also waiting for this info. Please tell us from what cars or ECUs we can extract ISN with AutoHex. Honestly - it is more than hard to get this info. |