Autohex II - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Autohex II (/showthread.php?tid=9415) |
RE: Autohex II Technical Support & Feedback - MTKAutoHex - 17-08-2017 The most secure and simple way to unlock BMW BDC and FEM. After you UNLOCK IT, you can: - Make a new key - Read / Write ISN - Write VIN -....ETC This video is a true live, we did not cut from it any part... ENJOY https://www.facebook.com/microtronik/videos/1436490446419512/ RE: Autohex II Technical Support & Feedback - volavka - 17-08-2017 (17-08-2017, 14:23 PM)MTKAutoHex Wrote: The most secure and simple way to unlock BMW BDC and FEM. Great news Just a Quick Question after unlock FEM can reset mileage too ? Best Regards RE: Autohex II Technical Support & Feedback - MTKAutoHex - 17-08-2017 Mileage reset will be possible only on CAS , FEM and BDC This function will be added in the soon future. RE: Autohex II Technical Support & Feedback - MTKAutoHex - 20-08-2017 AutoHex II BMW Diagnostic Software Version 1.0.44 Autohex II BMW Diagnostic software update is available for Autohex BMW users. BDC and FEM key programming is ready for Autohex II HW4. The function can be executed from CAS Firmware, it will generate a secret info file, then it will return the BDC/FEM back to exactly the original state. Autohex II BMW users can use the key programming function to make a key for FEM or BDC modules after they retrieve the secret info file. BMW configuration with useful options is available now. Expert mode can be activated by the user from this window. more information about these options can be found in our blog. French, Spanish, Portuguese, Chinese and Korean langauges are fully supported now. German and Turkish are available only in diagnose functions. RE: Autohex II Technical Support & Feedback - volavka - 20-08-2017 Good news that's Autohex hw4 will support BDM-JTAG Can't wait to test in some modules Cheers RE: Autohex II Technical Support & Feedback - emerer - 21-08-2017 (10-08-2017, 12:44 PM)bawareca Wrote: It is a 3 minute job. Took longer than 3 minutes because of downgrade the CAS, but at the end it worked RE: Autohex II Technical Support & Feedback - emerer - 05-09-2017 What do you guys use for the 3x 1000 Ohm resistors connections? Something self constructed or is there a ready solution to buy somewhere? RE: Autohex II Technical Support & Feedback - MTKAutoHex - 05-09-2017 You mean for boot mode? If so: 3 resistors, 1/4 or 1/2 watt. 1k ohms. Accuracy is 10%, 20% is ok too. RE: Autohex II Technical Support & Feedback - emerer - 05-09-2017 (05-09-2017, 04:56 AM)MTKAutoHex Wrote: You mean for boot mode? If so: Yes, but how to easy connect these 3 at the same time without soldering? Autohex II Technical Support & Feedback - bryosb - 05-09-2017 This is what I use Sent from my iPhone using Tapatalk |