+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: ESysPlus 2.8 (Suitable for ESys3.26.1 and 3.27.0 and 3.27.1) (/showthread.php?tid=9478)
RE: ESysPlus 2.8 (Suitable for ESys3.26.1 and 3.27.0 and 3.27.1) - Almaretto - 15-08-2017
(14-08-2017, 21:54 PM)Znuff Wrote: Can anyone tell me which is the last version of psdzdata that ESysPlus 2.8 + Esys 3.27.1 works with?
If I recall correctly, it is based off 3.56, so does not work well beyond 3.58.
RE: ESysPlus 2.8 (Suitable for ESys3.26.1 and 3.27.0 and 3.27.1) - Roo - 15-08-2017
(15-08-2017, 14:20 PM)Almaretto Wrote:I'm working with 3.62.1 data. Not sure, perhaps there're inconsistencies for some cases/ECUs, but I haven't faced them yet.(14-08-2017, 21:54 PM)Znuff Wrote: Can anyone tell me which is the last version of psdzdata that ESysPlus 2.8 + Esys 3.27.1 works with?
If I recall correctly, it is based off 3.56, so does not work well beyond 3.58.
RE: ESysPlus 2.8 (Suitable for ESys3.26.1 and 3.27.0 and 3.27.1) - MaxBmw - 15-08-2017
I am using normally LauncherPro from TokenMaster, i checked esysPlus 2.8 with new data it has frequent problem with cafd ..... not all but has
RE: ESysPlus 2.8 (Suitable for ESys3.26.1 and 3.27.0 and 3.27.1) - Almaretto - 15-08-2017
(15-08-2017, 16:10 PM)Roo Wrote:(15-08-2017, 14:20 PM)Almaretto Wrote:I'm working with 3.62.1 data. Not sure, perhaps there're inconsistencies for some cases/ECUs, but I haven't faced them yet.(14-08-2017, 21:54 PM)Znuff Wrote: Can anyone tell me which is the last version of psdzdata that ESysPlus 2.8 + Esys 3.27.1 works with?
If I recall correctly, it is based off 3.56, so does not work well beyond 3.58.
It is based on older legacy data than TM's Launcher. But, yes, E-sys Plus will continue to work, especially with older ECU's. It will not on G-series chassis.
RE: ESysPlus 2.8 (Suitable for ESys3.26.1 and 3.27.0 and 3.27.1) - Stivikivi - 21-08-2017
Can someone explain what's the main plus in regards of esys?
RE: ESysPlus 2.8 (Suitable for ESys3.26.1 and 3.27.0 and 3.27.1) - Almaretto - 21-08-2017
(21-08-2017, 20:59 PM)Stivikivi Wrote: Can someone explain what's the main plus in regards of esys?
Like Tokenmaster's Launcher, E-sys Plus provides token and mapping. Additionally there is script functionality to quickly apply changes.
EDIT: What it does it also listed in OP.
RE: ESysPlus 2.8 (Suitable for ESys3.26.1 and 3.27.0 and 3.27.1) - ddcoding - 03-11-2017
Were can i download esys plus?
Link on page one doesnt work
RE: ESysPlus 2.8 (Suitable for ESys3.26.1 and 3.27.0 and 3.27.1) - kayahulisi - 06-11-2017
(03-11-2017, 22:35 PM)ddcoding Wrote: Were can i download esys plus?
Link on page one doesnt work
yes were can i download best regards
RE: ESysPlus 2.8 (Suitable for ESys3.26.1 and 3.27.0 and 3.27.1) - uragan1987 - 06-11-2017
Esysplus is no more supported by snzdl
last version was 2.8,
should not work with last esys
RE: ESysPlus 2.8 (Suitable for ESys3.26.1 and 3.27.0 and 3.27.1) - Almaretto - 06-11-2017
(06-11-2017, 00:48 AM)uragan1987 Wrote: Esysplus is no more supported by snzdl
last version was 2.8,
should not work with last esys
There is very little advantage to using latest E-sys, unless you are programming, which requires no token.
Have you tried 5.0?