ESysPlus 2.8 (Suitable for ESys3.26.1 and 3.27.0 and 3.27.1) - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: ESysPlus 2.8 (Suitable for ESys3.26.1 and 3.27.0 and 3.27.1) (/showthread.php?tid=9478) |
RE: ESysPlus 2.7 (Fixed a bug) (Suitable for ESys3.26.1 and 3.27.0) - snzdl - 01-09-2015 (01-09-2015, 05:47 AM)botho Wrote: Is Esysplus will be available for 3.27.1 ? If I can get ESys3.27.1 I will support, but not yet. RE: ESysPlus 2.7 (Fixed a bug) (Suitable for ESys3.26.1 and 3.27.0) - hulahans - 06-09-2015 Is it correct ,that if i have multiple databases, and i fdl code a ecu or make a backup not the standard CAF folder in C/data will be used.Because for CAF i want to use this folder independent from what database i use RE: ESysPlus 2.7 (Fixed a bug) (Suitable for ESys3.26.1 and 3.27.0) - masa52 - 06-09-2015 Checked today and program not decoding completely all options in FMR in my F01 lots of options are empty RE: ESysPlus 2.7 (Fixed a bug) (Suitable for ESys3.26.1 and 3.27.0) - muranoone - 07-09-2015 I would check your PsdZdata make sure its correct in size. And I would recommend using PsdZdata V.56.2 full if you can. or V 56.2 Lite if available. I use this version with no issues. RE: ESysPlus 2.7 (Fixed a bug) (Suitable for ESys3.26.1 and 3.27.0) - hulahans - 10-09-2015 (06-09-2015, 16:17 PM)hulahans Wrote: Is it correct ,that if i have multiple databases, and i fdl code a ecu or make a backup not the standard CAF folder in C/data will be used.Because for CAF i want to use this folder independent from what database i useDo you have an answer sndzl? By the way tested scripting now , and works good for me RE: ESysPlus 2.7 (Fixed a bug) (Suitable for ESys3.26.1 and 3.27.0) - snzdl - 11-09-2015 (10-09-2015, 16:23 PM)hulahans Wrote:(06-09-2015, 16:17 PM)hulahans Wrote: Is it correct ,that if i have multiple databases, and i fdl code a ecu or make a backup not the standard CAF folder in C/data will be used.Because for CAF i want to use this folder independent from what database i useDo you have an answer sndzl? Sorry, I've ignored the problem. The Launcher (EXE), you can specify the data directory alone, even with the same version of ESYS. (The same version of ESYS you can also drag and drop more than one) And if the original data is intact, PLUS will not do anything. Good luck. RE: ESysPlus 2.7 (Fixed a bug) (Suitable for ESys3.26.1 and 3.27.0) - Slim125 - 23-09-2015 Good day BMW F10 56.3 version E-sys 3.26.1. CAS read , no parameters TC_MSA_MEMORY Prompt how to be? RE: ESysPlus 2.7 (Fixed a bug) (Suitable for ESys3.26.1 and 3.27.0) - supE60 - 23-09-2015 Hi, can someone share a new version of E-Sys 3.27 please? Thanks in advance. RE: ESysPlus 2.7 (Fixed a bug) (Suitable for ESys3.26.1 and 3.27.0) - snzdl - 23-09-2015 (23-09-2015, 09:50 AM)Slim125 Wrote: Good day I'm trying to fix this. RE: ESysPlus 2.7 (Fixed a bug) (Suitable for ESys3.26.1 and 3.27.0) - sbc55 - 24-09-2015 There are malwares associated with the program. Can you please scan and clean it. Whenever i run or download again, windows defender will show malware detected. Thanks. |