+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: PSA Group (Citroen - Peugeot) (https://cartechnology.co.uk/forumdisplay.php?fid=56)
+---- Thread: 308 retrofitting (/showthread.php?tid=9643)
308 retrofitting - Max2k - 27-08-2015
Hi guys,
am looking at a 308 sport that does not have much options installed
that I would like.
1. are auto lights
2 power fold mirrors
3. digital heater control
4. white clocks from newer 308
number 4 is easy as I found out that you can install the white clocks but as long as the miles are lower than on the car as it will just go with the bsi miles is that right?
power folding mirrors are to be sourced from a scrap car as well as the digital heater control as I can get the wires from the car from a quick look at service box they use the same heater box its just the motors installed then plugged into the controller and bsi?
I know some may say why not get the car with these but were I am they are big miles and are about 2k over my price range If this can be done I can get the parts for around £500 I was talking to a few breakers and they are happy for me to remove what I want but
I would need to be sure they would work if I get all the looms ect
it will be done over the few months not right away
thanks guys
RE: 308 retrofitting - superpjok - 19-04-2016
Hi!
Think 1. 2. and 4. is possible, you might need PP2000 / Diagbox to activate 1 & 2
3. Dont know
regs