Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Opel Vectra z30dt used engine ecu
28-11-2017, 18:33 PM,
Post: #1
|
|||
|
|||
Opel Vectra z30dt used engine ecu
I need to change engine ecu on vectra c 3.0 cdti Z30dt. It's a Denso ecu. What software do i need to virginize? Can i use opcom?
|
|||
30-11-2017, 21:07 PM,
(This post was last modified: 30-11-2017, 21:08 PM by dil6222.)
Post: #2
|
|||
|
|||
RE: Opel Vectra z30dt used engine ecu
(28-11-2017, 18:33 PM)X-treme Wrote: I need to change engine ecu on vectra c 3.0 cdti Z30dt. It's a Denso ecu. What software do i need to virginize? Can i use opcom? Yeah you should be able to read pin off new ecu with carprog unless you have pin already then with the pin reset the ecu with opcom or carprog then reprogram it with existing pin that matches rest of modules immo dash etc Hope this helps let me know how you get on If mine or others posts and info are helpful please give thanks/rep
|
|||
Reputation: +1 - X-treme [+1] | |||
01-12-2017, 07:23 AM,
Post: #3
|
|||
|
|||
RE: Opel Vectra z30dt used engine ecu
Thanks mate, but i don't see this ecu listed at carprog? Or do i have to read eeprom direct?
|
|||
01-12-2017, 16:21 PM,
(This post was last modified: 01-12-2017, 16:28 PM by dil6222.)
Post: #4
|
|||
|
|||
RE: Opel Vectra z30dt used engine ecu
(01-12-2017, 07:23 AM)X-treme Wrote: Thanks mate, but i don't see this ecu listed at carprog? Or do i have to read eeprom direct?From what I can remember you can open to read eeprom take a picture of ecu and post here so I can take a look Think MPPs can read this ecu if you have it ill check later If mine or others posts and info are helpful please give thanks/rep
|
|||
02-12-2017, 19:26 PM,
Post: #5
|
|||
|
|||
RE: Opel Vectra z30dt used engine ecu
Dont have the ecu here right now. I read it already with ktag. problem is i tuned the car and made dpf off. Since that day i don't get any MAF signal anymore, not with ori file and not with tuned file... Guess i killed the ecu somehow. New ecu is 2500 euro, so no option
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content