[hero3838]

Hi
I want to retrofit nbt evo id6 to f10 but read some form about nbt controller can not use with evo id6 is it correct or can i use nbt idrive controller with id6 is there any fdl codenong for controller in order to use with nbt evo id6 (id6 hu unit from g30)

[bmwcoder75]

Hi
I want to retrofit nbt evo id6 to f10 but read some form about nbt controller can not use with evo id6 is it correct or can i use nbt idrive controller with id6 is there any fdl codenong for controller in order to use with nbt evo id6 (id6 hu unit from g30)

Evo can use any Can2 controller from F series and Can4 controllers from G series

Now F10 can only use Can1/2 controllers. So can4 controller from G series would not work. Unless you have a Carsystems emulator that will convert Can4 to Can2 messages.

But I dont recommend using Can4 controller in F series with Carsystem emulator as it will give you other issues.

[hero3838]

Hi
I want to retrofit nbt evo id6 to f10 but read some form about nbt controller can not use with evo id6 is it correct or can i use nbt idrive controller with id6 is there any fdl codenong for controller in order to use with nbt evo id6 (id6 hu unit from g30)

Evo can use any Can2 controller from F series and Can4 controllers from G series

Now F10 can only use Can1/2 controllers. So can4 controller from G series would not work. Unless you have a Carsystems emulator that will convert Can4 to Can2 messages.

But I dont recommend using Can4 controller in F series with Carsystem emulator as it will give you other issues.

Thanks for replay but today i tried can2 controll (from nbt without touch ecu)with id6 it did not work but it works with nbt i use g30 fa do i need change fa and vo with another chassis or is there any fdl coding for id6 for controller for can2

[bmwcoder75]

Hi
I want to retrofit nbt evo id6 to f10 but read some form about nbt controller can not use with evo id6 is it correct or can i use nbt idrive controller with id6 is there any fdl codenong for controller in order to use with nbt evo id6 (id6 hu unit from g30)

Evo can use any Can2 controller from F series and Can4 controllers from G series

Now F10 can only use Can1/2 controllers. So can4 controller from G series would not work. Unless you have a Carsystems emulator that will convert Can4 to Can2 messages.

But I dont recommend using Can4 controller in F series with Carsystem emulator as it will give you other issues.

Thanks for replay but today i tried can2 controll (from nbt without touch ecu)with id6 it did not work but it works with nbt i use g30 fa do i need change fa and vo with another chassis or is there any fdl coding for id6 for controller for can2

You need to VO code your Evo using your F10 FA of course. Then it will work

[smilo]

You can’t VO code EVO with F10 FA.

[bmwcoder75]

You can’t VO code EVO with F10 FA.

Jeez since when?
Of course it works

[F32_PiccoloPiccolo]

I am looking to retrofit an ID6 unit into my F32. Is a B210 unit with HW 4.1 from a G11 or G12 model automatically a NATIVE ID6 unit?
How can I know whether it is touchscreen or not? The unit on the back side looks like this:

https://ibb.co/itaJk0

Thanks in advance