Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Tool32 problem
03-10-2019, 16:31 PM,
Post: #1
|
|||
|
|||
Tool32 problem
Hi there,
Im starting to be crazy about tool32. Everytime I try to run a job I get runtime 5 error - Tool Set Error: Run-time error ’5’ – Invalid Procedure Call Connection is ok, I found out a solution in FAQ like Reason: The Tool Set was started twice in a very short period of time. Solution: Close all Tool Set processes that are running and start the Tool Set again with only one double-click. But there is not any another instance of toolset in the processes! Im getting mad of it. This happens even after restart. Do somebody have any experience with that? Thanks!! |
|||
03-10-2019, 19:33 PM,
Post: #2
|
|||
|
|||
RE: Tool32 problem
Are you using ICOM or standard interface?
Is your tool32 set to run as Admin and with Win XP SP3 compability? Is the interfaces delay set for 1ms? |
|||
03-10-2019, 20:04 PM,
Post: #3
|
|||
|
|||
RE: Tool32 problem
Tool32 should be ran as administrator. It doesn't have to be XP compatibility, however.
|
|||
04-10-2019, 13:45 PM,
Post: #4
|
|||
|
|||
RE: Tool32 problem
Always start as admin
works fine on Windows 10 x64 .. |
|||
07-10-2019, 11:44 AM,
Post: #5
|
|||
|
|||
RE: Tool32 problem
It does this also with admin rights. And Im using oem ICOM.
|
|||
16-10-2019, 06:57 AM,
Post: #6
|
|||
|
|||
RE: Tool32 problem
Any other advice?
|
|||
10-09-2022, 10:04 AM,
Post: #7
|
|||
|
|||
RE: Tool32 problem
I do have the same issue. Dont know why. Using icom and win8.1 32bit
Član/Member
BMW Auto Klub “M” Zagreb BMW Club Europa |
|||
10-09-2022, 13:18 PM,
Post: #8
|
|||
|
|||
RE: Tool32 problem
Is there another Ediabas package or folder on your system? --> Delete thr second One, you don't need, its make Problems....
Coding E + F + G Modelles in near from Passau in Germany (Bavaria)!
Navigationmaps Updates for E + F + G Modells! I-Data Update on E + F - Modells. Repair FRM3 & LM !! |
|||
10-09-2022, 13:53 PM,
Post: #9
|
|||
|
|||
RE: Tool32 problem
If your Ediabas folder find the REGSVR32.BAT then start it (with administrator)
![]() Vojnó
Press Thanks and reputation ![]() |
|||
Reputation: +4 - zmaj [+1] , al70 [+1] , Twointje [+1] , BMWzone [+1] | |||
12-09-2022, 20:28 PM,
(This post was last modified: 12-09-2022, 20:30 PM by zmaj.)
Post: #10
|
|||
|
|||
RE: Tool32 problem
(10-09-2022, 13:53 PM)Vojno Wrote: If your Ediabas folder find the REGSVR32.BAT then start it (with administrator) Hi, thank You for the tip. I ran it and it told me that tool32 is installed and the two modules are registred. Will try tomorow to connect it to my car. I hope it will do it (10-09-2022, 13:18 PM)Illuminati23 Wrote: Is there another Ediabas package or folder on your system? --> Delete thr second One, you don't need, its make Problems.... No there isnt. every time i make a backup I put it in a rar so it should not intefere. Everything works except tool32 (and i need it). Član/Member
BMW Auto Klub “M” Zagreb BMW Club Europa |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
![]() |
G11 PRoblem TV Channel | budddyyy | 9 | 180 |
9 hours ago Last Post: budddyyy |
![]() |
F10 3.0d Engine from 258hp to 245hp Problem with ecu | budddyyy | 5 | 178 |
12-06-2024, 12:53 PM Last Post: DieStream |
![]() |
BMW MGU21 Emmc Writing Problem (Request) | donjuan020 | 10 | 793 |
05-06-2024, 00:22 AM Last Post: donjuan020 |
![]() |
BMW e87 LCI hralights retrofit problem | XeoN | 1 | 71 |
31-05-2024, 14:40 PM Last Post: wrp_199 |
![]() |
G30 Entrynav2 - rear camera retrofit problem | Krysiaman | 19 | 1,502 |
23-05-2024, 20:39 PM Last Post: Node |
Bmw G31 retrofit Mgu id7 atm problem | intranet | 20 | 2,794 |
26-04-2024, 08:06 AM Last Post: smilo |
|
![]() |
NBT EVO Connected Drive problem after update I-Level | SkeYT | 47 | 4,995 |
22-04-2024, 11:44 AM Last Post: kwat |
BMW E60 coding problem | GarageX | 8 | 411 |
02-04-2024, 10:07 AM Last Post: GarageX |
|
Tool32 Brakefluid Argument | bmchicago | 4 | 390 |
29-03-2024, 13:41 PM Last Post: bmchicago |
|
![]() |
Bmw 5,f10 radio problem | RobertRexhaj | 3 | 197 |
28-03-2024, 18:47 PM Last Post: Unspec |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content