Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Repair FRM 3 R56 HIGH. The emergency light alarm itself is activated.
25-01-2023, 18:18 PM,
Post: #11
|
|||
|
|||
RE: Repair FRM 3 R56 HIGH. The emergency light alarm itself is activated.
(24-01-2023, 15:48 PM)bmchicago Wrote: you tried reprogramming/reflashing FRM3 with ISTA/P ? Most of these control units that fail have updated software available. Through ISTA+/P, one FRM block will not be able to be updated, there will be a complete update of all blocks according to plan. I wouldn't like to. Or is it possible to program only FRM through ISTA? I can update the software in FRM3 via WinKFP |
|||
25-01-2023, 18:19 PM,
Post: #12
|
|||
|
|||
RE: Repair FRM 3 R56 HIGH. The emergency light alarm itself is activated.
okay to use winkfp
|
|||
25-01-2023, 18:33 PM,
Post: #13
|
|||
|
|||
RE: Repair FRM 3 R56 HIGH. The emergency light alarm itself is activated.
|
|||
26-01-2023, 15:43 PM,
(This post was last modified: 26-01-2023, 15:44 PM by TIGHTFIN.)
Post: #14
|
|||
|
|||
RE: Repair FRM 3 R56 HIGH. The emergency light alarm itself is activated.
(24-01-2023, 15:53 PM)Gabriel87 Wrote:It didn't help. Same problem. I understand that the short circuit is in the FRM3 itself(24-01-2023, 14:46 PM)TIGHTFIN Wrote: Hello everyone. (25-01-2023, 18:19 PM)bmchicago Wrote: okay to use winkfpUpdated FRM3 via WinKFP did not help, most likely a short circuit in the FRM3 block itself |
|||
26-01-2023, 15:53 PM,
Post: #15
|
|||
|
|||
RE: Repair FRM 3 R56 HIGH. The emergency light alarm itself is activated.
Did you even try to read faults from it?
|
|||
26-01-2023, 17:35 PM,
Post: #16
|
|||
|
|||
RE: Repair FRM 3 R56 HIGH. The emergency light alarm itself is activated.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content