[vagService]

Hi, I have passat B8 after crash, main impact was from engine side. Engine with gearbox were little moved to the back. When we started to repair this car, engine was rebuilded and gearbox also. They replaced covers, shafts, forks etc… on this DQ500.
Engine with gearbox was assembled and we decided to test their function but there was a problem.
Gearbox was stuck in 5th gear, diagnosed bad mechatronic unit. Ordered new mechatronic unit from dealer, replaced, coded. Car starts, runs fine and finally shifts gears. I performed basic settings of mechatronic, but now we can't do clutch adaptations (drive test). Gearbox is shifting "crunchy" this gears: R, 4, 6. Also in 4 and 6 you can rev it only to 3500rpm, and one other "symptome", after longer drive in 6th, will come up warning about gearbox temperature.

DTCs are P1899 and P176A (clutch 2). Clutch were also replaced, but still this problem.

Engine - 03N906026E - sw2114 - H23 (stock)
Gearbox - 0DL300011 - sw4701 - H10

Thanks for any help with this mystery.