[lacost]

ECE

I dint make japanese backup

[Mwahab]

Then i don't know
I have a Japan unit, but the process will take sometime, our upload speed is 10mb only

[lacost]

I tried again.
Upgrade to JP ZB (xxx3423)
And the fan stopped and everything OK (only CD and Radio enabled). In the music collection, I see tracks.
As I read in this post https://cartechnology.co.uk/showthread.p...#pid548847 preparing FA without JP and code CIC.
After that, I flash 63 (xxx3417) -62-A0 in the expert and the fan 100% and the black screen.

I got the ECE cic from another car - and it's from Harman
My JP cic is from Alpine.

Maybe my cic has a different hardware?

[Node]

Of course its different hardware. You CAN'T just flash it to fully ECE firmware and expect it to work. Hence a workaround provided to you by Mwahab!!! And of course it will NOT be fully same as ECE.

[lacost]

OK,
How about maps? Is it make sense to try to inject 19/1B FSC codes for ECE-maps and enable Navi?
Or this CIC will only play music?

[Mwahab]

It will have maps when u use ece hdd after you complete the flash

[lacost]

Hmm

I use ECE hdd
I try to execute intel123 patch (but He says, that patch for ECE and US only).

target:/home/root> /dev/shmem/patcher
CIC PATCHER v1 by intel123
PATCH FAILED

[Adekborys69]

Hmm

I use ECE hdd
I try to execute intel123 patch (but He says, that patch for ECE and US only).

target:/home/root> /dev/shmem/patcher
CIC PATCHER v1 by intel123
PATCH FAILED

did you manage to fix it ? i have e90 jpn cic that is fulle working in e84 but navigation is greyed out , i was trying to use patcher but is not working form me as well

[lacost]

did you manage to fix it ? i have e90 jpn cic that is fulle working in e84 but navigation is greyed out , i was trying to use patcher but is not working form me as well

No!
I don't have a working solution.

Someone says that you can just flash the software from ECE, and everything will  be good. But, it didn't work for me. I spent a couple of weeks trying various options and sequences, but I did not find a working solution. I read somewhere that it is necessary to flash something else before flash winKFP, but I did not get the details. Maybe there are certain hardware versions where it works, but not for me.

If you leave the JPN software, then the patcher from intel123 does not work on it.
And I didnt know about patcher for JPN version.

So I left the JPN version for now, and left it without navigation.

[TurboDriver]

Use these ZB in photo, it will work
Thats E90 to E60 for Japan HU
All in comfort mode, i did it twice like that, worked without issues
After that, you can load your “ECE HDD”

It doesn't work this way, after software update you can't simply swap HDD and it works. The Japan Alpine unit software doesn't have 19 FSC to enable ECE navigation