[Sdiefel]

Hi guys,

Can anyone please modify MAF Linearization Table of 1.8 T File from AJQ Engine in ME 7.5?

Original Diameter 60mm -> New Diameter 70,5mm.

Just give me the Adress of the Table would also help me a lot!

audi tt me7.5.rar
File Type:
Downloaded:	6 times
Size:	194.68 KB

[hdcarmods]

try 118DA 512x1 modify as you like

[Miata]

D=sqrt(4w/Pi*p*v)
D - diameter
w - mass flow
p - density
v - flow rate
Formula for calculating the diameter of a pipe for a certain flow rate at a certain speed.

---

As a result, the calibration ratio will be equal to the ratio of the squares of the diameters.

0,0705^2 / 0,06^2 = 1,380625

You need to multiply the linearization map by 1.38 considering an offset of -200kg