Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
G31 3AG retrofit issues with ICAM4 update
15-10-2023, 16:44 PM,
Post: #1
|
|||
|
|||
G31 3AG retrofit issues with ICAM4 update
Hello together,
I retrofitted the rear view camera on a G31 today, the camera is connected to the BDC. First I changed the vehicle order +3AG, coded BDC, ACSM, HU and injected CAFD from the ICAM4. The camera works fine and there is nothing in the error memory. I tried to update the camera with E-Sys and got this message: Switching to programming mode was not successful for: ICAM4_0x06 [WARNING]. Topology error: ECUid: ICAM4_0x06 is not accessible because the ECU cannot be switched to programming/encoding mode. When I try to read out the SVT I also get Ethernet errors :-/ Till now tried with: S15A-22-03-530 E-Sys 3.30, 3.38 and 23.04.00 and PSdZData_4.39.30 Vehicle I-Level: S15A-22-03-530 Best regards. |
|||
15-10-2023, 17:17 PM,
Post: #2
|
|||
|
|||
RE: G31 3AG retrofit issues with ICAM4 update
If you try to update with enet my friend had same problem and I falsh successfully with enet+dhcp server
Successfully retrofit on BMW F30 335xi 248,302,3AG,430,5AG,5AS,6NS,8TH,IHKA3
|
|||
15-10-2023, 18:20 PM,
Post: #3
|
|||
|
|||
RE: G31 3AG retrofit issues with ICAM4 update
(15-10-2023, 17:17 PM)Siki78 Wrote: If you try to update with enet my friend had same problem and I falsh successfully with enet+dhcp server I have already tried to flash with ENET cable and ICOM Next directly connected to my laptop, unfortunately without success. Will flash the days with latest psdzdata and enet+dhcp server. The question is, why do I get the error when I try to read VCM? Read (ECU) works fine |
|||
15-10-2023, 18:22 PM,
Post: #4
|
|||
|
|||
RE: G31 3AG retrofit issues with ICAM4 update
You can`t read vcm just read ecu
Successfully retrofit on BMW F30 335xi 248,302,3AG,430,5AG,5AS,6NS,8TH,IHKA3
|
|||
16-10-2023, 08:10 AM,
Post: #5
|
|||
|
|||
RE: G31 3AG retrofit issues with ICAM4 update
disable programming mode in tal execution and try again
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
F20 cruise control retrofit | maninblack | 5 | 117 |
10 hours ago Last Post: qbek90 |
|
Programming_ Changes with xx-xx I level update that are perceptible to the customer | shawnsheridan | 11 | 2,169 |
Yesterday, 13:55 PM Last Post: shawnsheridan |
|
BMW e87 LCI hralights retrofit problem | XeoN | 0 | 21 |
21-05-2024, 21:17 PM Last Post: XeoN |
|
Tool to use to cut leather dashboard for hud retrofit | Fx82 | 3 | 306 |
19-05-2024, 15:29 PM Last Post: Fx82 |
|
HELP NEEDED TU UPDATE ISTA D 4.41.50 TO 4.42.12 | ipcsr76 | 1 | 411 |
18-05-2024, 08:53 AM Last Post: piteerus |
|
F01 LCi Xenon Headlight Retrofit | mcrussell | 0 | 54 |
16-05-2024, 11:57 AM Last Post: mcrussell |
|
retrofit USB BMW E63 | Jalami | 9 | 257 |
15-05-2024, 17:39 PM Last Post: The CaT |
|
Retrofit comfort access BMW f26 | santopalermo | 13 | 419 |
14-05-2024, 12:25 PM Last Post: ruben_17non |
|
F25 cic retrofit | hero3838 | 3 | 111 |
10-05-2024, 15:44 PM Last Post: Siki78 |
|
G21 paddles retrofit | bm92 | 5 | 224 |
09-05-2024, 21:07 PM Last Post: bm92 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content