[RaoulK1998]

If you get resistor error in ISTA, you have to write QR code on headlight to it, or adapt from working side to replaced side. there is service function for it.

i just checked with toyota ista 4.40 and there is no abl for matrix code. only fub document.

Have you tried flashing and encoding the lights, usually on these G BMWs the headlights require a flash before they can be properly encoded, maybe thats what is going wrong. when i have base model G20, i just flash and encode and it works. only on the more fancy headlights there is seperate function to write QR data matrix

[Sauron]

If you get resistor error in ISTA, you have to write QR code on headlight to it, or adapt from working side to replaced side. there is service function for it.

i just checked with toyota ista 4.40 and there is no abl for matrix code. only fub document.

Have you tried flashing and encoding the lights, usually on these G BMWs the headlights require a flash before they can be properly encoded, maybe thats what is going wrong. when i have base model G20, i just flash and encode and it works. only on the more fancy headlights there is seperate function to write QR data matrix

Yes of course flashed with original VO

[TheNine90]

Try tool32 to add matrix code
FLM_BINNINGDATEN_LEUCHTE_SCHREIBEN