[pepi]

I cant reset Adblue with Xentry , it request online connection for it .
I have this fault codes 
P30055F Communication failure with NOX sensor downstream of SCR catalytic ...
P300685 The starter was disabled by exhaust aftertreatment system
P30066D AdBlue sytem Warning stage 3: Starting engine is not possible due to fault in adblue system
P300656 Consequential fault : The emision limit for the NOX concentration  has been exceeded 
P300964
P300965
Now I got " Emer. oper. 20km/h No start in : 0km
I want to disable SCR but before I do that I need to reset it inn stock file.

Can someone describe step by step reseting with Vediamo please ?

[mercis]

SCRCM:
1. Init Contact
2. DJ_Zugriffsberechtigung_Drive
3. DL_End_of_Line_Task_Inducementsystem
4. ECU reset / Ignition OFF/ON
5. Read Faults Codes

ECU
1. Init Contact
2. DJ_Entriegelung_9A
3. DJ_Entriegelung_BC
4. DL_046C_SCRCtl_ctTampProt
5. DL_0471_End_of_LineTask_Inducement
6. ECU Reset / Ignition OFF/ON
7. Read Fault Codes

[pepi]

I can read the ecu and fault codes but I have this error when trying DJ_Entriegelung_9A
Do you know what can it be ?

[ross2018]

You need to unlock the ecu first.

[kobservice]

Need help on CR43 Adblue reset with Vediamo

Hardware 651 901 40 01 Bosch 11/14 000
Software 651 902 01 02 Bosch 14/12 000
Software 651 903 11 37 Bosch 14/47 000
Boot software 651 904 04 01 Bosch 11/14 000
Diagnosis identifier 020B07 Control unit variant CR43_Diag_07h

Fault
P13E400 The remaining driving distance is limited due to a malfunction in the AdBlue® system.

P2BA9FD The emission limit for the NOx concentration has been exceeded (AdBlue® quality is too low).
   


Yours sincerely, Kobservice