[skautolocksmith]

Hi
Can you help with Evoque L538 -2013 key programming?
I have attend a job to program a 2nd key on Evoque -using original Abrites .
The software vent all the way true and on programming part ,on the window said
'pres the unlock button and hold for 5 sec' - i start with the existing key ,i have hold the button for 5 sec (the car windows came down) but the window on software has not change ,i have wait for 4-5 minutes but no change - software freeze. I have to restart the PC and start again this time with the new key(brand new) 1st the car dose not recognizance the key when i hold the unlock button for 5 sec -software freeze again - Not happening .
And on the end the smart part of the car stop working ,remote control on the existing key work ,on the car screen come 'smart key is not recognize check user manual '
From the user manual - i have to position the key under center console and hold their to start the car .
I clear all the DTC , i have disconnect the battery for 2- 3 min -the problem is still not solve.
-'Stability control is not active' on car screen to .

Did one of you experience similar problem and do you know haw to bring the smart system back and stability control to ?
Thanks

[arturius]

If you did it the second time with a new key is normal the car does not recognize the key , have you tried repeat it with the original key??
Abrites have messed many cars with their RR soft .
So also battery voltage are not too down ?
Do not forget that those car have hignt consumation of electriciti , so always use a booster.
hope is not the bcm or the KVM that are not KO.

Good luck !